Wiring horn to Aftermarket steering wheel

swervn50

New Member
May 30, 2006
3
0
0
I swaped the steering wheel on my 1990 5.0 to a grant steering wheel but I couldnt figure out what wires are for the horn because the wires for the cruise control and for the aribags are all together. Has anyone done this before? I just need to know which wires are for the horn.
 
  • Sponsors (?)


I dont have an airbag wheel (I have an '88) but the horn was the outer-most pin of the 3 pins that meet the slipring IIRC.
I'd REALLY recommend tracing wires and testing them carefully to make sure you dont do something like ground the airbag circuit.

Good luck.