Wiring Question, Need advice quick!

I have an 85 Mustang which I am getting ready to drop a turbo coupe motor into. The 85 is carburated so I bought an 87 Mustang donor car for the EFI wiring and interior. I will be swapping over the entire interior and all electronics from the 87 into the 85 in preparation for the turbo motor but I also have the Turbo Coupe harness for the turbo motor. I know the 87 harness can be modified to work with the turbo computer but since I have the entire dash and all apart anyway should I just use the turbo coupe harness or go ahead and use the 87 mustang harness and re-pin it? Will the turbo coupe harness even work in the mustang? Thanks

Mike

140cilx said:

I'd throw in whichever is in the best shape. They are nearly identical. If you use the TC one, you don't have any repinning or minor splicing to do - but it's really not that big of deal. Which one looks fresher?

Click to expand...

There are both mint condition. Guess I'll through in the TC harness so I have no cut wires. just wanted to make sure there were no issue with using the TC harness. Thanks.