• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Wondering where I should go from here..

  • Thread starter Thread starter iLLesTBullitt
  • Start date Start date Oct 20, 2005
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 20, 2005
#1
  • Oct 20, 2005
  • #1
Hi guys, quick backround - just entered college at Boston University and left my car from HS at home although i dont want to abandon it because i'll have it for the next 4 years (in sig) and thought about all the money i spent on audio and it was a waste, so im going to sell my 2 systems and should get 3 grand for them. I want to take half into my bank account and put the other, 1500$, into the engine as a winter project/summer

My question is what do you think I can do that would be the best bang for the buck at my stage in the game. Have to include labor prices except for very easy stuff like upping the boost and puttin a smaller pully on which i can do myself, and stuff like if i wanted wider rear tires i can do that too.

My main concerns were that if i upped the boost and all it would be harmful on the engine, so i would need forged internals? how much would all of this cost, i think one of the options i could do is up it to like 9 lbs of boost, put a midpipe on and then dyno tune it and be at just about my 1500$ mark with maybe money left over for new tires

Idk im gonna stop talking, any suggestions would be great, thanks!
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Oct 20, 2005
#2
  • Oct 20, 2005
  • #2
Upgrade the suspension, check out www.maximummotorsports.com for some ideas. I dont know jack about forged internals so I cant help you there.
 
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 20, 2005
#3
  • Oct 20, 2005
  • #3
I dont think im going to do mess with suspension, besides hte fact that my dad wont allow it, i already welded in sub frame connectors and have the bullitt stance which is sufficient enough, i was lookin for more power out of the engine
 
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 20, 2005
#4
  • Oct 20, 2005
  • #4
No suggestions?
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Oct 20, 2005
#5
  • Oct 20, 2005
  • #5
Have you had it dynoed yet?
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Oct 20, 2005
#6
  • Oct 20, 2005
  • #6
yeah, the bullit suspension is DECENT enough, not great by any means, but better than a GT. i would get some nice blower cams and a set of L/T headers to really wake up that blown beast. expect ~45-50 rwhp w/ both mods and a tune
 
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 20, 2005
#7
  • Oct 20, 2005
  • #7
i would get that but thats over 1500$..got to include labor, and then the dyno tune for 500$. So blower cams and l/t and dyno woul dbe way out of the question
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Oct 20, 2005
#8
  • Oct 20, 2005
  • #8
iLLesTBullitt said:
i would get that but thats over 1500$..got to include labor, and then the dyno tune for 500$. So blower cams and l/t and dyno woul dbe way out of the question
Click to expand...

Honestly you won't be able to do any motor work for $1500 if you can't do the work yourself. Put a nitrous kit on to help cool the aircharge of your blower and give it more zing, if power is what you are looking for. You could easily do that for $1500 installed.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Oct 20, 2005
#9
  • Oct 20, 2005
  • #9
iLLesTBullitt said:
i would get that but thats over 1500$..got to include labor, and then the dyno tune for 500$. So blower cams and l/t and dyno woul dbe way out of the question
Click to expand...
true, too much $, what was i thinking......
well at least get some blower cams
Cams & Springs=$700
Install=$350
Dyno Tune=$400

there you go
 
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 21, 2005
#10
  • Oct 21, 2005
  • #10
Yeah, nitrous is out of the question..but if cams are that cheap (thought they were more expensive), although i dont know where to get them - but if i can get them for a good price id do that and then maybe a smaller pulley and then dyno it..that'd be cool

you think thats better than doing like, smaller pulley + headers/midpipe and then dyno?

Thanks for the suggestions, takin alot down
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Oct 21, 2005
#11
  • Oct 21, 2005
  • #11
iLLesTBullitt said:
Yeah, nitrous is out of the question..but if cams are that cheap (thought they were more expensive), although i dont know where to get them - but if i can get them for a good price id do that and then maybe a smaller pulley and then dyno it..that'd be cool

you think thats better than doing like, smaller pulley + headers/midpipe and then dyno?

Thanks for the suggestions, takin alot down
Click to expand...
i wouldnt push boost too much. im assuming youre not intercooled.
youre stock cams are a limiting factor now. the blower is pushing all this air, but your stock cams are still only openeing and staying open the stock amount. get some aggressive cams that will really let all that air into the comb. cham.!
 
F

fellamansteve

New Member
May 24, 2004
108
0
0
Seattle
Oct 21, 2005
#12
  • Oct 21, 2005
  • #12
If I were you, I'd get an intercooler and up the boost to 9psi.
 
I

iLLesTBullitt

New Member
May 10, 2005
6
0
0
Oct 21, 2005
#13
  • Oct 21, 2005
  • #13
Cool cool good suggestions, i think i'll either get a intercooler and up boost/dyno it, or get up boost without an intercooler and get blower cams/dyno tune it
Will do research on both, thanks for the suggestions
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
M
What cam and heads should I run in my stock 302.
  • MadMatt7
  • Oct 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
487
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2026
FastDriver
P
market for 2.3L? i wanna sell
  • Patk
  • Dec 6, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
5
Views
404
2.3L (N/A & Turbo) Tech Dec 7, 2025
rednotch
D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
123
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?