• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

Woo hoo, the car runs

  • Thread starter Thread starter bhuff30
  • Start date Start date Sep 5, 2006

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Sep 5, 2006
#1
  • Sep 5, 2006
  • #1
After nearly a whole year of no fun, the 88 runs again. Last winter or so, the poor a4ld gave up the ghost, so I rebuilt a C4, and didn't even get it running right before finding rod knock in february and parking it for a while.
Well, I rebuilt the engine, and it lives again. There are certainly plenty of small problems to work out, but it runs great.
So far, I've only been running 10psi since it is so fresh still. It feels dang good though. It will squirm a little in 1st, and on the 1-2 shift (around 50mph) it will make the speedo jump 5-8 mph. Feels like about 200hp.

I'll have to continue working out the bugs, but I test fit the 06 GT wheels on. It looks like they will work great. I've also got a set of stock 4cyl springs I'll replace the chopped 99+ springs with. That should really help the ride, and give it more bite on the ground in streight lines. BTW, anyone have a reference for the stock ride height? I'd hate to put these springs in, and see it sitting taller than stock because of some weight loss.
 

dls322

Member
Apr 4, 2005
149
0
16
Mt. Penn, PA
Sep 5, 2006
#2
  • Sep 5, 2006
  • #2
Sweet, glad you got her up and running....down time sucks!
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Sep 5, 2006
#3
  • Sep 5, 2006
  • #3
i recently fired mine up for the first time also...what sucks as much as the down time is the break in. I really want to know what it will do but i want to make sure it goes through the proper break in. But with the Ported head and essy 2277 cam and straight 3" DP i get the evil Eye when driving around. So im taking it this week end to get the bullet put on Anyway good luck with yours.....
 

Dan P.

Founding Member
Apr 26, 2002
483
0
27
N.C.
Sep 5, 2006
#4
  • Sep 5, 2006
  • #4
Good news man, happy to see her back on her feet
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
804
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
705
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?