woohoo got my 1.49 60ft

rsw007 · Apr 19, 2006

after several low 1.50's i finally got my 1.493 60ft that the barrier i wanted to make. thats still with the stock motor no porting and bolt-ons with a 125 shot of juice. 11.77@111 with 1.49 60ft it has hot at the track too 85*

tunedin302 · Apr 19, 2006

Congrats

Kdubslugga · Apr 19, 2006

I dont understand how you do it. I got a 1.94 60ft and i was pumped!!!! Thats freakin amazing!

rsw007 · Apr 19, 2006

i cant say enough about my edge converter. its loose enough to work good on motor but still tight enough to work on the spray. just running out of power up top too much gear.

jackchan · Apr 19, 2006

awsome! keep on keeping us posted. these are the threads I like to read!
Ben

25thmustang · Apr 19, 2006

I love seeing cars go faster and faster at the track. I think that 60' is about as good as you could ever hope for on a stock motor and a reletively small shot. Very impressive. Makes me think about a 150 shot for some fun!

Kdubslugga · Apr 19, 2006

Are you running 4.10s RSW?

86bluecobra · Apr 19, 2006

i want to know what suspension mods you have.

Rick 91GT · Apr 19, 2006

You don't have a roll bar do you??? I'll explain after you reply.

rsw007 · Apr 19, 2006

no roll bar no anti roll bar no air bags no swaybar at all. just bought some air bags for the rear its starting to roll over a little.
heres a pic. of a 1.502 60ft

Rick 91GT · Apr 19, 2006

I found with the stock motor and no bar the chassis flexed so much it actually made the car hook. Then when I added the bar, subframes, etc...I had to tweak and tune the suspension to make it hook.

Either way nice passes

86bluecobra · Apr 19, 2006

damn i want a nice pic like that of my car lifting the front tires. wtg.

rsw007 · Apr 19, 2006

Rick 91GT said:
I found with the stock motor and no bar the chassis flexed so much it actually made the car hook. Then when I added the bar, subframes, etc...I had to tweak and tune the suspension to make it hook.

Either way nice passes

i have subframes and torque box reinforcements and would like to get a six point rollbar. havent found one i like yet. i want to be able to still use the backseat because my two kids go with me to the track.

timewarped1972 · Apr 19, 2006

i always enjoy reading your posts. it's refreshing to see someone rip off times like that with what you've done to that thing when there's alot more powerfull cars out there struggling to get where you have........great job.....i think your the official poster chid in here for AOD'S

ok so, you had like 287 rwhp on, what was it a 90 shot, now you've added some more so your what, maybe 310 rwhp now??

i'm curious how much your car weighs.....

rsw007 · Apr 19, 2006

330rwhp 440tq and 3220lbs car and driver

90NotchBack · Apr 19, 2006

I have a stock 351W that runs 1.65 60ft 7.97@85 1/8 12.61@106 1/4 and I thought that for a stock 351W that was pretty quick for what it is but your 302 makes that thing look slow. On a 200 shot my car goes 10.90's@124. The best so far is 10.87@126 and this is with 100% stock 4cyl. suspension. But my 60ft's on spray never been that fast. 1.53 60ft 6.89@99 1/8 10.87@126. Lets just say they told me to park it. You 60ft are awsome.

1988WHTGT · Apr 19, 2006

Damn, I can't get better than a 1.87 60'

Tonys96Cobra · Apr 19, 2006

Thats way impressive! Glad to see somebody without $xxxx dollars in mods do it, with an AOD too. Very nice!

Foxfan88 · Apr 19, 2006

GIVE ME THE SECRETS TO 1.6'S!!!!!!!!!!

rsw007 · Apr 20, 2006

Foxfan88 said:
GIVE ME THE SECRETS TO 1.6'S!!!!!!!!!!

aod with good converter

woohoo got my 1.49 60ft

New Member

I AM the law!!!

Active Member

New Member

New Member

Mustang Master

Active Member

Advanced Member

Mustang Master

New Member

Mustang Master

Advanced Member

New Member

Member

New Member

New Member

Member

professional deer "mounter"

My Grandpa has great wood.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency