• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

worst 21st b-day ever, how bad is it?

  • Thread starter Thread starter Aliate X
  • Start date Start date Mar 7, 2007

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Mar 7, 2007
#1
  • Mar 7, 2007
  • #1
Well I was screwing around in the snow in the parking lot of my school and I do one donut, just once around then go to park and the car shuts off, I start it back up and it has this HORRIBLE vibration, probably the worst vibration Ive ever felt. I open up the hood and I hear/see the balancer jumping around. Now my question is, is it possible that just the balancer came apart or could I have damaged the crank too? The car is still parked in the parking lot Im going to go over and change the balancer over there, assuming thats the problem. Also last I pulled the balancer off was in may and I do not recall if I have to take the radiator out or not, do I?

Thanks guys, yes worst 21st bday ever.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Mar 7, 2007
#2
  • Mar 7, 2007
  • #2
Well my first question was it firing on all cylinders? If it was odds are the cranck is ok but you balancer is toast. Because you didn't run it for long i would suspect that it is ok. Get a new piece and see what happens.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Mar 7, 2007
#3
  • Mar 7, 2007
  • #3
yeah it ran for maybe 15 sec, nothing above 1500 rpms. Well I guess a true gearhead spends his 21st bday in the college parking lot changing his balancer lol.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Mar 7, 2007
#4
  • Mar 7, 2007
  • #4
Aliate X said:
yeah it ran for maybe 15 sec, nothing above 1500 rpms. Well I guess a true gearhead spends his 21st bday in the college parking lot changing his balancer lol.
Click to expand...

lol oh yah 21 is a big year in the states isn't it. Not so big in canada. Yes get that dampner replaced. Don't be surprised if your going to be taking the rad out to do the job.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 7, 2007
#5
  • Mar 7, 2007
  • #5
I ran around for a hundred miles or so with a balancer that was going bad. I didn't realize what was happening until it completely spun and separated like yours did.
I replaced the balancer and am still driving the car without any noticeable problems. God takes good care of me & my Mustang...

Removing the balancer
The radiator stays in place, but you will need a harmonic balancer puller to get the balancer hub off. AutoZone or most big auto parts stores will rent/loan you one.



Here’s a neat site that has photos (its for a chevy, but it still works the same) http://www.chevyhiperformance.com/howto/53578/

I recommend that you replace the harmonic balancer timing cover seal at the same time. It has a flange on it that you can grip with a pair of Visegrips. Once the Visegrips are super tightened in place with the opening lever facing the front of the car, you can rock the Visegrips against the timing cover and cause the seal to pull out. Coat the new seal's metal housing with a small amount of silicone gasket sealer and use the old balancer hub to drive it in place. The new balancer will slide into place, be sure to lube the crank and seal area. Carefully align the keyway in the balancer with the key on the crank. Before you install the bolt and tighten everything up. The balancer bolt takes over 100 ft/lbs of torque to tighten it properly, so you’ll need a 15/16” socket and a long breaker bar or ratchet.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Mar 7, 2007
#6
  • Mar 7, 2007
  • #6
I think a bad 21st birthday would be driving home from the bar, doing a few donuts in a parking lot, and hitting a lamp post really hard which would bend your car in half.

Then shortly after, a cop rolls up, gives your a ticket for reckless driving, then smells alcohol on your breath and writes you a drunk driving ticket that will cost you $5,000-$10,000 dollars.

That's a bad 21st birthday!!!! :SNSign:
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Mar 7, 2007
#7
  • Mar 7, 2007
  • #7
happy 21st!
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Mar 7, 2007
#8
  • Mar 7, 2007
  • #8
I had to change mine in the parking lot at my office. It broke right before I got into the parking lot! Luckily my wife brought me my jack and stands, extra tools and clothes. Ended up using a long pipe on my rachet positioned against the side rails and "bumped" the motor to break the bolt loose. Then I forgot about the washer under the nut when I tried to pull the balancer I eventually got it replaced, but it sure beat a tow truck bill.

Good luck on it!
 

rickd93_lx

New Member
Dec 22, 2005
162
0
0
Mar 7, 2007
#9
  • Mar 7, 2007
  • #9
i have a stock balancer you can have for shipping. happy 21 the years are going to fly by now, youll see what i mean.
 

shhak

New Member
Dec 4, 2006
109
0
0
Mar 7, 2007
#10
  • Mar 7, 2007
  • #10
Don't want to be the negative one here, but last time I had a balancer bouncing around it was on a 327 Chevy. THE CRANK WAS BROKE!!! Happened while spinning donuts in my high school parking lot after school one day. Sound familiar? No snow involved, but yes, the crank was broke just inside the front cover.
 

rickd93_lx

New Member
Dec 22, 2005
162
0
0
Mar 7, 2007
#11
  • Mar 7, 2007
  • #11
the moral of the thread "donuts are for cops"
 
3

310stanger

New Member
Aug 15, 2006
170
1
0
Mar 7, 2007
#12
  • Mar 7, 2007
  • #12
Care to say what kind of balancers you guys have had that are failing? Stock ones I presume. When I did my trickflow package I went overboard and put on a Fluidampr.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Mar 7, 2007
#13
  • Mar 7, 2007
  • #13
personally I don't let god touch my mustang however I'd drop the sig and stop advertising what you're doing...other than that replace the balancer with a good quality aftermarket piece and enjoy years of service.
 
D

DJ MIKE A

New Member
Nov 13, 2006
38
0
0
Mar 8, 2007
#14
  • Mar 8, 2007
  • #14
My stock one came apart. No damage done. 30 minute fix and a way smoother ride!
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Mar 8, 2007
#15
  • Mar 8, 2007
  • #15
SVT32VDOHC said:
I think a bad 21st birthday would be driving home from the bar, doing a few donuts in a parking lot, and hitting a lamp post really hard which would bend your car in half.

Then shortly after, a cop rolls up, gives your a ticket for reckless driving, then smells alcohol on your breath and writes you a drunk driving ticket that will cost you $5,000-$10,000 dollars.

That's a bad 21st birthday!!!! :SNSign:
Click to expand...

Yeah same here, it's not that bad hehe
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Mar 9, 2007
#16
  • Mar 9, 2007
  • #16
Couldnt of happened to a nicer guy..
I am RsStanG1987 and i approved this message
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 9, 2007
#17
  • Mar 9, 2007
  • #17
v8only said:
personally I don't let god touch my mustang however I'd drop the sig and stop advertising what you're doing...
Click to expand...

Visit the web site and you will find nothing for sale - just some free tips on how to fix your Mustang and build some automotive related items. Some pictures of my shop area and a “Meet the Owner” biography tell a little about me.
 
You must log in or register to reply here.

Similar threads

S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
662
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
556
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
176
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
458
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
553
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?