Write up requests in here...

tylers65 · May 2, 2005

Ask for write ups in here.

This thread will be pruned now and again as requests are filled.

2MFF-Z28 · May 2, 2005

Write up request..

I'd like to see a cam and head job on gp001's 05. Also include longtubes, x pipe, 430's and drag radials..........maybe some tuning

duner · May 2, 2005

2MFF-Z28 said:
I'd like to see a cam and head job on gp001's 05. Also include longtubes, x pipe, 430's and drag radials..........maybe some tuning

Me too and a blower install

gp001 · May 3, 2005

2MFF-Z28 said:
I'd like to see a cam and head job on gp001's 05. Also include longtubes, x pipe, 430's and drag radials..........maybe some tuning

Are these safety concerns?

Keep your eye out for a wrecked 05 with engine for sale

2MFF-Z28 · May 3, 2005

Yes, all the parts listed are very "unsafe" in stock condition.

gp001 · May 4, 2005

2MFF-Z28 said:
Yes, all the parts listed are very "unsafe" in stock condition.

I'll let you explain that to Stef this weekend

sullygtstang · May 9, 2005

I would like to see a step by step how to take off the hydro carbon trap

mikeelia · May 10, 2005

Could the site inlcude an area with the TSBs all shown?

Do we have an area of the site with the TSBs listed out? That would be awesome.

I am looking for the strut rod bearing listing right now.

Mike Elia
SoCal
Upland CA
05 gt lime
87 Buick Regal Turbo T

Jewls05GT · May 11, 2005

mikeelia said:
Do we have an area of the site with the TSBs listed out? That would be awesome.

I am looking for the strut rod bearing listing right now.

Mike Elia
SoCal
Upland CA
05 gt lime
87 Buick Regal Turbo T

I would like to know this as well. Other forums have this, and I love the idea.

gp001 · May 11, 2005

I will work on a compilation of them and post a sticky

Jewls05GT · May 11, 2005

Thanks GP!

bigcat · Jan 8, 2006

since i dont see it, and i know many people have done it, how about a nitrous install. it would help out many people looking in that direction for more power.

also, how about all the shifters that have been installed.

Stangnut · Feb 2, 2006

Not really a How-To, but I would suggest posting something that would explain to people the way tire and wheel sizes work.

This would not only include what all the numbers mean, but more importantly, when the wheel gets bigger, the side wall gets smaller. (This is that assuming you're going to stay close to the stock tire diameter unless you want to recalibrate your speedo or have it be wrong)

This would also aleviate the belief that bigger wheels fill in the "gap".

There are still a LOT of people out there who don't understand this.

k5zx · Apr 15, 2006

Horsepower gains for different mods to different cars. ilke this
CAI - 8 hp
whatever brand supercharger - 80 hp
jet computer chip- 30 hp
NOS- etc etc

and about how much each part costs between the part name and the gain

k5zx · Apr 21, 2006

it would be nice to see a write up on CAI for 5th gens- both autos and trans. to cover each brand, what they are made of, do they pull air from fender, etc. how much tehy cost. I know there is a ton of info here on CAI but it would be nice to make just one write up wand just as CAI applies to our generation cars

k5zx · Apr 21, 2006

chip upgrades

An article on our generation mustang's computer chips, the different options in upgrading them or reporgramming them, how much each costs and how its done and the typical hp gain

k5zx · Apr 22, 2006

Pictures

Stangnut said:
Not really a How-To, but I would suggest posting something that would explain to people the way tire and wheel sizes work.

This would not only include what all the numbers mean, but more importantly, when the wheel gets bigger, the side wall gets smaller. (This is that assuming you're going to stay close to the stock tire diameter unless you want to recalibrate your speedo or have it be wrong)

This would also aleviate the belief that bigger wheels fill in the "gap".

There are still a LOT of people out there who don't understand this.

It would be good to have pictures of various tired and sizes on our cars too for this

k5zx · May 2, 2006

Test Thread

Have a test thread where people can post stuff like signatures like the one I just made and am testing here to test

<a href="http://forums.rpmplanets.com/vbpicgallery.php?do=hall&u=261">
<img border="0" src="http://forums.rpmplanets.com/sigimages/261.png"></a>

[link=http://forums.rpmplanets.com/vbpicgallery.php?do=hall&u=261]
[image noborder]http://forums.rpmplanets.com/sigimages/261.png[/image][/link]

bigcat · May 2, 2006

k5zx said:
Have a test thread where people can post stuff like signatures like the one I just made and am testing here to test

http://forums.stangnet.com/forumdisplay.php?f=3

praztek · Sep 12, 2006

Adjustable Upper Control Arm

Looking for info on install along with making proper pinion angle changes.

Thanks

Write up requests in here...

tylers65

I've got your tool right here!

2MFF-Z28

New Member

duner

Mr. Warmth

gp001

2MFF-Z28

New Member

gp001

sullygtstang

New Member

mikeelia

New Member

Jewls05GT

New Member

gp001

Jewls05GT

New Member

bigcat

start with the upper hole, and if more traction is

Stangnut

Member

k5zx

New Member

k5zx

New Member

k5zx

New Member

k5zx

New Member

k5zx

New Member

bigcat

start with the upper hole, and if more traction is

praztek

New Member

Similar threads

Write up requests in here...

I've got your tool right here!

New Member

Mr. Warmth

New Member

New Member

New Member

New Member

New Member

start with the upper hole, and if more traction is

Member

New Member

New Member

New Member

New Member

New Member

start with the upper hole, and if more traction is

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency