wtf!!!!!!!!!! overheating help

sick_azz_cobra · Jul 27, 2006

what did i do wrong? my car overheating was the whole reason everything went wrong in the first place. i get it all back together and its still overheating, put in a be cool radiator and a new thermostat (195) the top hose is hard as a rock i even put the thermostat in boiling water before i put it in and it opened up, tomorrow im going to put in a new waterpump just so i have every angle covered... is there a way to bleed our 94-95s when you put in coolant? i know normally you can see the water flowing in the rad but not mine it just bubbles up and out wtf is the problem?

sick_azz_cobra · Jul 27, 2006

oh aaand now i have a check battery light and a cel grrrrrr im going to set this thing on fire!

sick_azz_cobra · Jul 27, 2006

also how do i pull codes without a scanner?

drakesdad · Jul 27, 2006

sick_azz_cobra said:
also how do i pull codes without a scanner?

I have to ask...if you put the new therm and rad in did you let the car run without the cap on the rad and squeeze your line a few times to get all the air out........if not your car will overheat right away...

R.J. · Jul 27, 2006

Is the fan coming on at all? with the A/C on?

sick_azz_cobra · Jul 27, 2006

drakesdad said:
I have to ask...if you put the new therm and rad in did you let the car run without the cap on the rad and squeeze your line a few times to get all the air out........if not your car will overheat right away...

i did but maybe not long enough? how long do you do that for? does seem like there is a lot of air and no lie i drove it maybe 5 miles and my autometer read 250? when i filled it up it kept bubbling out finally i got aggravated and put the cap on and drove it and my a/c stopped coming on?

sick_azz_cobra · Jul 27, 2006

no fan or a/c? the a/c was working fine before but now it just blows warm because the compressor isnt coming on anymore... i jumped a wire from the battery to the compressor and it came on, any ideas?

drakesdad · Jul 27, 2006

sick_azz_cobra said:
i did but maybe not long enough? how long do you do that for? does seem like there is a lot of air and no lie i drove it maybe 5 miles and my autometer read 250? when i filled it up it kept bubbling out finally i got aggravated and put the cap on and drove it and my a/c stopped coming on?

You could have several air "pockets" that will take some time to get out.....that's why I mentioned squeezing the top hose........you'll watch the temp guage go fluctuate as your doing this.....I did a head on a chevy cav and it took some time to get all the air out......

drakesdad · Jul 27, 2006

I've also tapped "lightly" on he gooseneck.....I know you said you boiled it......let me know if you are going to "bleed" it tonight..

sick_azz_cobra · Jul 27, 2006

i was doing that but all it kept doing was overflowing out of the rad.... bad water pump maybe.. but when it was off i checked it and it seemed ok? i hate my car!

sick_azz_cobra · Jul 27, 2006

i ordered a new water pump so im going to wait till tomorrow when it comes in then ill change the thermostat again and the pump and start all over if that doesnt work im taking it to the woods and setting it on fire. you dont think there could be anything wrong with the intake or anything like that do you?

drakesdad · Jul 27, 2006

sick_azz_cobra said:
i was doing that but all it kept doing was overflowing out of the rad.... bad water pump maybe.. but when it was off i checked it and it seemed ok? i hate my car!

When you squeeze the hose and coolant bubbles up......does it then drop back down some..........it gets a little messy

drakesdad · Jul 27, 2006

Did you ever diagnos why the car was overheating to begin with........I saw in the thread it was overheating before....?

sick_azz_cobra · Jul 27, 2006

yeah it goes back down then right back up...

drakesdad · Jul 27, 2006

sick_azz_cobra said:
yeah it goes back down then right back up...[/QUOTEThat sounds to me like the air pockets.............When I did the Cav for a friend I forgot to bleed the air out and within 3 to 5 miles the guage was pegged........I really don't think it could be your intake.....how far did you tear the engine down........did you pull the heads......if so is the gasket good.......no leaks...

sick_azz_cobra · Jul 27, 2006

all the way to the block, i did the compression test after three rotations each cylinder hit 175 on the gauge.

sick_azz_cobra · Jul 27, 2006

when i shut the car off i heard hissing it was hard to tell from where exactly but it sounded near the water pump, but absolutely no loss in power?

drakesdad · Jul 27, 2006

The only problem with the intake would be if the gasket was not aligned correctly......you did a dry fit with the intake gasket right........the hissin'.......could be many things..........your def. close......it's the cooling system...you've ordered the waterpump....check the t stat and to be sure check the intake gasket........but you'll still have to bleed the air out......

sick_azz_cobra · Jul 27, 2006

i will do all that tomorrow and post results, if it doesnt change ill post pics of a burned up svt. thanks for all the input.

drakesdad · Jul 27, 2006

sick_azz_cobra said:
i will do all that tomorrow and post results, if it doesnt change ill post pics of a burned up svt. thanks for all the input.

No problem...I'll be off with the kid all day and on line so holla at me.....You ARE on the path.....sometimes it takes to walk away for a bit and come back.....go enjoy your night and we'll tackle that beast tomorrow.....we've all wanted to torch 'em at one time....it'll be worth it....
Will

wtf!!!!!!!!!! overheating help

New Member

New Member

New Member

Member

Member

New Member

New Member

Member

Member

New Member

New Member

Member

Member

New Member

Member

New Member

New Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency