X303 cam??

Menace Stang · Mar 1, 2008

Is anyone running one?? I currently have a Lunati 51014 that I have not installed yet. I heard that the X cam gives great power (just drive ability sucks) but I have a DD. And I know you need to cut the pistons..

I'm thinking about going with Trick flow twisted wedge heads, X303 cam, and a Holley Systemmax upper and lower. I also will be doing long tubes, what do you's think good set up or no?

Thanks guys

Black95GTS · Mar 1, 2008

Would you use a computer processor invented in the 80s to supe up your desktop PC?

So why use a camshaft invented in the 80s to supe up your car?

Adam

Menace Stang · Mar 1, 2008

Black95GTS said:
Would you use a computer processor invented in the 80s to supe up your desktop PC?

So why use a camshaft invented in the 80s to supe up your car?

Adam

Tell that to the 90% of people with mustangs running, E, F, X cams....They must be doing something right

DDSTANG94 · Mar 1, 2008

I gotta go with Adam on this one..will many people due run them cams and they may see good results, i dont think its 90% of people, and if it is 90% of the people they could be doing better.....and u will no doubt get more power with a custom cam and not have to worry about cutting the pistons and such, and u can tell them exactly what u want the car to do, and not just buy a cam because "someone" said it will be good with ur combo, if anything with that cam and intake i would think ur low end tq would suffer,,I'm am not a cam expert by any means but...You didn't cheap out on ur Name brand Aluminium heads nor did u on ur intake, why cheap put on the cam which is one of the most importtant things in the equation in making power and making that power at what rpm u want...good luck man

Menace Stang · Mar 1, 2008

DDSTANG94 said:
I gotta go with Adam on this one..will many people due run them cams and they may see good results, i dont think its 90% of people, and if it is 90% of the people they could be doing better.....and u will no doubt get more power with a custom cam and not have to worry about cutting the pistons and such, and u can tell them exactly what u want the car to do, and not just buy a cam because "someone" said it will be good with ur combo, if anything with that cam and intake i would think ur low end tq would suffer,,I'm am not a cam expert by any means but...You didn't cheap out on ur Name brand Aluminium heads nor did u on ur intake, why cheap put on the cam which is one of the most importtant things in the equation in making power and making that power at what rpm u want...good luck man

I 100% agree with the both of you....Sorry if I came off like that Lol.

But I could get a very good deal on an x cam instead of spending $300+ a custom grind...We'll see I do agree about not taking the cheap way out when it comes to the cam.

If I have enough $$ I will 100% get the custom grind. I might look into Comp Cams..

DDSTANG94 · Mar 1, 2008

Menace Stang said:
I 100% agree with the both of you....Sorry if I came off like that Lol.

But I could get a very good deal on an x cam instead of spending $300+ a custom grind...We'll see I do agree about not taking the cheap way out when it comes to the cam.

If I have enough $$ I will 100% get the custom grind. I might look into Comp Cams..

cool

hopefully someone with a little more knowledge on that cam will chime in for ya..

Menace Stang · Mar 1, 2008

DDSTANG94 said:
cool

hopefully someone with a little more knowledge on that cam will chime in for ya..

Thanks man

PUNISHER RACING · Mar 1, 2008

I run an X in my DD, with ported stock heads, an Xcellerator and a 650 dp with 4.30's its not a bear to drive at all!

Black95GTS · Mar 2, 2008

Not saying you have to buy a custom, even a TFS Stage 1 would do you better then a letter cam. The Crower 15511 is a great little cam. I don't know too much about the Lunati. An AFM B-31 cam will work with the stock pistons and 94-95 eec too.

Adam

X303 cam??

Menace Stang

New Member

Black95GTS

Active Member

Menace Stang

New Member

DDSTANG94

New Member

Menace Stang

New Member

DDSTANG94

New Member

Menace Stang

New Member

PUNISHER RACING

Active Member

Black95GTS

Active Member

Similar threads

X303 cam??

New Member

Active Member

New Member

New Member

New Member

New Member

New Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency