Hey fellas, I did an H/C/I on my 93 lx with aluminum gt40 turbo swirl heads, gt40 intake, e303 cam, and i used the 93 cobra electronics (x3z ecu, 24# injectors, and the 93 cobra 70mm MAF calibrated for the 24# injectors) but my 93 was a 5 speed. It worked great and I loved the setup so now I am doing a very similar setup on a buddys SN95 but the only difference is its got an automatic trans. My question is, what would happen if i used the X3Z ecu on this car? Would the trans not operate correctly and not come out of park because the ecu would not have the necessary tuning for the auto trans? Just wondering because that setup really ran good and its the easiest way to set it all up by just using the X3Z ecu rather than tuning an A9L or A9M (auto ecu) to use the 24# injectors and 70mm MAF. Anybody thought of this or tried this in the past? Any thoughts appreciated, thanks in advance!