x3z maf electronics vs. a9l maf electronics

Is the maf sensor the same for the 93 cobra as for the 5.0 HO Mustang? I am just talking about the electronics/sensor that mounts on the maf tube.

I ask because I am moving on to a TwEECer tomorrow, and need to find a close maf transfer curve for my 73mm C&L MAF. There are several which I have downloaded, but they only state that the transfer is for "stock 55mm maf" in a 73mm with XXXX color tube. This is not enough info for me and my Full Cobra setup. I have a few C&L sample tubes to choose from, but need to know about the sensor itself.

So are the 5.0 HO and 93 Cobra Maf sensors interchangeable?
I am pretty sure they are both still 0-5v, but I want to make sure.

Thanks guys,
jason

TTT

In case any of the 28 people who viewed this thread care...

According to C&L the Mass Air Sensor is different between the A9L and the X3Z.
These sensors are not interchangeable.

Also,
The cobra computer seems to be very poorly supported by C&L. They do not have one MAF transfer for the Cobra electronics/computer. They never have put this setup on a flow bench.
I'll have to map my own MAF Transfer.

jason