Xenonworx dual beam HID install help

MUSTANGT281

New Member

Dec 19, 2007

2

0

0

Dec 19, 2007

#1

• Dec 19, 2007

• #1

I got this kit the other day and it has a main wiring harness and it has three bare wires coming from it red,blue,white. I was told by American Muscle that those wires needed to be spliced in. The question is I don't know were to connect them to. If you have any info or pics I would greatly appreitate it.

 

P

plnfixr320

New Member

Jul 9, 2007

55

0

0

High Desert CA

Dec 19, 2007

#2

• Dec 19, 2007

• #2

Installation Notes:

The dual HID H13 kit for 2005 and newer Mustangs does not use a plug. The harnesses will have three wires: blue, white, and brown. These wires plug directly into the connectors.

Blue Wire = High Beam
White Wire = Low Beam
Brown Wire = Ground

 

MUSTANGT281

New Member

Dec 19, 2007

2

0

0

Dec 20, 2007

#3

• Dec 20, 2007

• #3

Thanks! I really didn't get to look at the wiring on the car because ford has it right now. I got the old puff of Blue Smoke after sitting for about two days crapola crapola