• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electrical Yet Another Tfi Question...

  • Thread starter Thread starter madspeed
  • Start date Start date Jun 18, 2014

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Jun 18, 2014
#1
  • Jun 18, 2014
  • #1
Finally tore into my Gt tonight. Need to order a new TFI, as the old unit is pretty melted. I know everyone says to get oem, but is it even available anymore? I check Rock Auto for part numbers and they list a few...

MOTORCRAFT Part # DY1284 $49.79

MOTORCRAFT Part # DY1076 $109.99



Which ones are you all having good luck with?
 

Blown88GT

Founding Member
Nov 13, 1999
2,283
524
164
Palm Beach Gardens, FL
Jun 19, 2014
#2
  • Jun 19, 2014
  • #2
You didn't say what year?
Which one?
 

rockstarwb

Member
Mar 8, 2014
25
5
14
Fairview, Tennessee
Jun 19, 2014
#3
  • Jun 19, 2014
  • #3
I went on fordparts.com and it listed part# DY425 for 90-93 Manual transmission,DY504 for 90-93 Auto transmission,and DY1284 for 87-89 but it didn't state whether the 284 was for manual or auto and didn't even list the DY1076 module at all.Rockauto listed both DY1076 and DY1284 modules but didn't state which one fits the auto and which one fits manual.It has to be the right one cause a auto module won't work on a manual because the manual module has to allow the push start feature I believe so you can roll start it if the battery is dead,etc
 

FoMoCo17

Member
Apr 1, 2011
188
3
18
Jun 20, 2014
#4
  • Jun 20, 2014
  • #4
Ive privately spent several years working w MSD on their distributors problems that I found. Anyway, they recently addressed their tfi modules and I have been told that they tested many aftermarket modules n found their flaws and are sourcing one that practically matches the original Ford TFI Module. The defect that was in them from Ford was never really corrected they just settled their lawsuit and subsequently relocated these modules to the fender. But the aftermarket ones were even more crap than the Ford original ones. So if you can't get one from Ford, MSD's module may be your next best bet because they looked at its flaws and tested them all! Hope this helps!
 
You must log in or register to reply here.

Similar threads

Wanting to replace my BOSS 351C Engine Harmonic Balancer - Questions about 'Balance?'
  • 69machmike
  • Oct 31, 2024
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
592
1965 - 1973 Classic Mustangs -General/Talk- Nov 5, 2024
Realmongo
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
486
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
B
Engine Radiator Replacement Questions
  • bicknell
  • Jul 12, 2023
  • Fox 5.0 Mustang Tech
Replies
9
Views
3K
Fox 5.0 Mustang Tech Jul 15, 2023
Mindseye007
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?