Your Blower Combos

1fast03pony · Aug 27, 2006

Your Blower & N/A Combos

Theres a thread over at MPH's forums that goes on for about 12 pages or so. Its everyone posting up their blower combos and supporting engine mods. I think it would be great to bring something like that to stangnet; for it will serve a few purposes. It will help others gauge what kind of blower set up they can go with and what approximate numbers they can expect with that setup. It will also give n/a guys a chance to pick a tried and true setup that meets their hp/reliability goals.
N/A guys can also post their combos with the same reasoning.

Ill start:

Kenne Bell 2.1L @ 9psi (intercooled)
Stock Block
KB Big tube
KB Cold air
75mm T/B
90mm MAF
36lb injectors
Ford GT40 Fuel pump
BBK L/T
BBK O/R X pipe
Magnapacks
Tuned by Dan Carlson @ Realspeed Automotive (THE MAN)

390whp/386tq on a mustang dyno...

Maybe this could become a sticky...?

SaleenGT2001 · Aug 29, 2006

i'll post up my old numbers and keep it updated as i do more to the car.

Paxton Novi 2000 mongoose kit @10psi
C&L plenum
75mm TB
O/R x pipe
stock catback w/ flowmasters
aluminum flywheel
3.90 gears

375 RWHP
385 RWTQ

new numbers up on friday with custom IC and new s/c pulley

AmBo · Aug 29, 2006

Vortech SQ-V2 @ 10psi
Accufab 75mm Throttle Body
Accufab Plenum
FRPP 3.73s
Weld-in Flowmasters
4" MPH Boost Pipe
42lb Green Top Injectors
Focus Fuel Pump
90mm Lightning MAF

353rwhp

nwapache · Aug 29, 2006

Vortech S-V1 @ 10psi 3.33 pulley
Dragon 75mm Throttle Body
Dragon Plenum
FRPP 3.73s
Weld-in Flowmasters
4" MPH Boost Pipe
42lb Green Top Injectors
Focus Fuel Pump
90mm Lightning MAF
I just copied AmBo's stuff since we have the same kit!
348/357

hotmustang331 · Aug 29, 2006

Great thread...but do I get to post up my combo too. Or is this a "blown sausage guys only" fest?

1fast03pony · Aug 30, 2006

Hm... I guess we can do n/a also.. why not?

hotmustang331 · Aug 30, 2006

NM i guess if you will allow N/A combos, I can post my twin turbo setup (im not N/A anymore ) Thanks!

2 57MM turbo chargers
Dual inlet/single out FMIC (24X18X3.5)
Custom made (BY US) headers and tubing
Tial 50MM BOV
2 Tial 38MM waste gates
Stock shortblock
VT stg 1 cams
P&Pd trick flow plenum
BBK 75MM TB
Lightning 180* Tstat
Canton windage trey
42# injectors
SCT 4 bank flip switch chip
Spec stg 3 clutch
Fidanza aluminum flywheel
FRPP 3.73 gears
March U/D pulleys p blower guys)
SCT BA-2400 MAF (blow through)
Ford GT (40) fuel pump
Dr Gas O/R X pipe
Magnaflow cat back

No #s yet...may be a while while we finish fabbing everything up .

stangliter04 · Aug 30, 2006

2004 GT
Vortech V2SQ 3.33 pulley
42lb injectors,focus fuel pump,90MM MAF
BBK 75MM TB and PLENUM
SCT tuned by Ed Clark 360HP/360TQ

no boost pipe yet....
ok guys if you are getting a centri supercharger gears are a must!!!

PonyboyIsaac · Aug 30, 2006

2001 GT
KB 1.7 9# kit intercooled
36lb injectors
boost a pump
SLP longtubes, catted xpipe, loudmouth1s
power 378rwhp 392rwtq
tuned by Dan at dynosport Lincoln, NE

KB cold air kit and 75mm throttle body comming soon with new tune and numbers.

Cantslowdown · Aug 30, 2006

Even tho i am not blown...This is a great thread..:SNSign: Maybe someday

stanggt00 · Sep 1, 2006

my dyno numbers 8psi vortech

ok guys here are my dyno numbers

8psi vortech mongoose kit super safe tim tune

i am working on the diy intercooler set-up with the help of a lot of you guys i will do a picture by picture write up on the install

atm i am using the stock 3.60 pulley with mph powerpipe

once i get the intercooler installed i will also drop to a smaller pulley to get the boost to 9-10psi since the tune is so safe i dont think i will need a retune from tim i will have to ask him about that to be sure

i will also be doing a blower cam install a little later

the goal is 400hp with a very safe tune

ok ok enuff talk let me post my dyno numbers :

View attachment 443496

View attachment 443498

as you can see i have a very safe tune
tim told me i can lean the car out to about 11.5-12 doing so i will pick up a lot more hp and tq

at the track on street tires i was running 13.6@107
so i am going to get some dr's and some practice and see if i can get in the 12's i was spinning so bad that i think my trap speed is low also

Gearbanger 101 · Sep 1, 2006

I'm sick of changing this list everytime I get a new mod......Just click on "My Garage" at the top under my user name for the details.

ProCharger GT · Sep 3, 2006

See my garage..I'll be into the 500's when I fix the leaky valve cover gasket and regap the plugs (getting blowout at 6500 RPM's, graph in my garage is an older one). Finally have the fuel system to support it.

TweekedGT · Sep 3, 2006

Here's mine:

Forged SHM 5.0 Modular Stroker Rotating assembly
Kenne Bell 1.7 @ 10PSI
Walbro 255lph In Tank Fuel Pump
60# Injectors
SCT 90mm MAF
2004 PI Heads
Crower Stage 2 Blower Cams
Mac Straight Shot CAI
Mac Longtube Headers
370RWHP 373RWTQ @ 6PSI on a Mustang Dyno
Guessing 450RWHP 450+ RWTQ @ 10PSI
Car is stupid fast.

Built98GT · Sep 3, 2006

98 Mustang GT
Built short block, Eagle H beams, Probe 17cc Pistons
PI swapped
Vortech S trim 8#
Anderson Power Pipe
42lb injectors
Comp XE270AH Cams
MAC longtubes,X Pipe,Flows
70mmTB and Trick Flow Plenum
C&L MAF, Aviator Pump
3.73 gears
SCT chip and tune by SWTuning in Oklahoma City.
Car loses fuel and spark around 5k rpms. KB boost a spark, motorsport wires, Aeromotive fuel rails awaiting install.

353rwhp 361trq but never really pushed on the dyno.

posm6s · Sep 3, 2006

Can those with a Lightning post here?

helty · Sep 3, 2006

01 Bullitt

Vortech SQ MOngoose kit, 10psi
FRPP 3.73s
All else stock, even exhaust

370/370

View attachment 443235

turbofreek · Sep 3, 2006

94 cobra all stock tb to oil pan
mpt70 turbo
tial 38mm gate
no intercooler
6psi
42lb injectors
80mm pmas meter
255 intank pump
ran 12.51 at 102.9mph with a 2.11 60ft granny shifting at cordova just this friday
guessing around 400hp? will know for sure in a few days
heres a few vids from friday. it was my first passes down the track with the car and turbo setup.
http://videos.streetfire.net/video/a22d2775-34a7-4f01-a758-983000fb67e8.htm
http://videos.streetfire.net/video/7f88f924-64a6-4f6e-8141-983101885321.htm

Gearbanger 101 · Sep 4, 2006

turbofreek said:
94 cobra all stock tb to oil pan

Get that damn OHV out of here......modular club members only!!!

stangman · Sep 4, 2006

Paxton Novi 2000 - 8lbs
VT engine stage 1 cams
FRP 42lb injectors
SVT Focus fuel pump
KB Boost-a-pump
Lightning 90mm MAF
70mm TB
Trickflow plenum
Mac longtubes
Mac Prochamber
Mac flowpath mufflers

most important part....SCT tune by Tim Barth :thumb:

this combo got me 442/397 to the tires on a sooooper safe tune

i assume that we're just doing power supporting mods, so that's ll i'll list

Your Blower Combos

Member

Well-Known Member

Active Member

New Member

Active Member

Member

Active Member

New Member

New Member

New Member

New Member

Straight Outta Locash

Member

New Member

New Member

New Member

some Ukrainian's enjoying a handjob via my credit

New Member

Straight Outta Locash

Similar threads

Privacy & Transparency

Privacy & Transparency