393

[A5literMan]

I believe it's around 260

[email protected] Im sure. Going to rpm pretty good might see 7k rpm( you're going to need a looser converter and more rear gear). You did tell them the entire combo right?

 

[maxtree]

Need some seriously dished Pistons or some big chambers to NOT have 10:1 cr with a 393 build. Lol advertised duration...it is a custom grind. I'm sure they took all the pertinent info needed I would expect at least 230's [email protected] and more likely over 240 with at least 10.5:1cr. Op might see 550 flywheel hp and close to 500 ft lbs torque.

I hope around 550 it's got flat top pistons i think it was around 12in a half to one with iron heads

 

[maxtree]

[email protected] Im sure. Going to rpm pretty good might see 7k rpm( you're going to need a looser converter and more rear gear). You did tell them the entire combo right?

Oh yeah

 

[barnett468]

I believe it's around 260

260 advertised duration would be a tiny cam and it wouldn't have .600 lift.

 

[barnett468]

i think it was around 12in a half to one with iron heads

you will need to run race gas then

 

[maxtree]

260 advertised duration would be a tiny cam and it wouldn't have .600 lift.

I'm not sure

 

[maxtree]

you will need to run race gas then

Yeah I had to