anyone running a TFS-R BOX INTAKE on a sn95

[darrellk]

just wondering if anyone is running one of these intakes, if so could u post pic. and what size hood do i need to clear it, thanks

 

[95Vert]

a friend of mine is running some type of box intake, and has the stock hood.

 

[69clark]

I know there's someone on here with a black car running one, or atleast use to. I can picture the engine bay but not the member.

 

[speedytang]

I would be more worried if you have the engine to back up the intake. The Box is like all others and it is a flat power band till about 3200rpm and it did not show any gain in torque till about 6600 rpm and we shut the car down and was 40hp less than the RPMII all across the rpm running 14psi of boost.

 

[darrellk]

i have a 12.5:1 comp. 347, with fully ported canfield heads, 600" hydrolic roller from bullit, 1 7/8 kooks headers, 75mm TB, 80mm mass, and power pipe, and 200 shot of nitrous, i think that this in take will work well but maybe not, what do u think

 

[MattZ281LE]

I have a Downs Fords upper but its under a cobra R hood with 1/2" spacer. I think its taller than the TFS one. Not sure on that.

Mine would probably fit without the spacer under the stock hood. Considering it sits atop a GT40 intake.

Definately a high RPM intake.. comes on at 3500+

 

[Redsnk95]

Required a 1.5" cowl hood on my car. Get some drop motor mounts and it will fit under the stock hood.

 

[turbogt]

hmmmm. I wonder how high my hood is..

 

[turbogt]

I have a Downs Fords upper but its under a cobra R hood with 1/2" spacer. I think its taller than the TFS one. Not sure on that.

Mine would probably fit without the spacer under the stock hood. Considering it sits atop a GT40 intake.

Definately a high RPM intake.. comes on at 3500+

I'm really interested in the numbers you are going to put out. If I don't go turbo I will be upgrading to a T-trim with AFR 225's and a Dart 364