Billet Oil Pump Gears?

[jivepepper]

I have had MMR's high flow pump and stock oil pan for 6k now, and so far so good.
But I do check the oil almost everytime I take it out, and I run about 6.5 quarts.

 

[RandyStinchcomb]

Ok cool. So I should just get an MMR pump... It comes with a pick-up, but its probably the standard Cobra/FRPP tube, so is there a pick-up tube that I can use that doesn't require me to lose half the windage tray? Is the Canton windage tray the only one that has interferance - could I go with a different windage tray to work with the Cobra pick-up tube?

This stuff is making my brain hurt.

its not the windage tray that needs tobe trimmed but the matal plate on the pick-up tube and its not the big of a deal. now the is another tray you can use and that the factory DOHC windage tray but its only a 1/2 length tray and once you buy the tray and all the hardware, its @$80.00

 

[Back2Mustangs]

its not the windage tray that needs tobe trimmed but the matal plate on the pick-up tube and its not the big of a deal. now the is another tray you can use and that the factory DOHC windage tray but its only a 1/2 length tray and once you buy the tray and all the hardware, its @$80.00

Gotcha, Randy. Thanks for the help. This info is priceless for people like me who are new to the modular world.

 

[RandyStinchcomb]

Gotcha, Randy. Thanks for the help. This info is priceless for people like me who are new to the modular world.

no problem, sorry for all the spelling errors in the last post but I was swamped thjis mornin'