North East SSoM Members!!!

New tires are in guys. I am taking them to get mounted today:D It does not look like it here because of the angle, but the BFG 295's are actually just as wide as my Nitto 315's

newtires4al3.webp


newtires3mj7.webp


newtires2gt6.webp


newtires1tj4.webp
 

Attachments

  • newtires4al3.webp
    newtires4al3.webp
    46 KB · Views: 76
  • newtires3mj7.webp
    newtires3mj7.webp
    40.3 KB · Views: 81
  • newtires1tj4.webp
    newtires1tj4.webp
    52.9 KB · Views: 70
  • newtires2gt6.webp
    newtires2gt6.webp
    71.9 KB · Views: 79
Well the Clutch is swaped, and the input shaft / TOB sleeve is in. Tried like hell to get the trans back in, but that thing is a beast! I will get it in tomorrow. I was just too damn tired to keep struggling with it by myself. Pics:

Drive shaft out
img0767ya3.webp


Prochamber on the floor
img0768aj1.webp


Trans on the bench
img0771vc5.webp


look closely and you can see the stock TOB sleeve warped
img0772wm9.webp


Stock clutch ready to come out.
img0773kk0.webp


26 spline going in
img0775bk6.webp


10 spline ready to go in the trash
img0776qd4.webp


back together with the 26
img0777ke3.webp


Fidanza Flywheel and Spec 3+ in.
img0778ew8.webp
 

Attachments

  • img0767ya3.webp
    img0767ya3.webp
    2.8 KB · Views: 65
  • img0768aj1.webp
    img0768aj1.webp
    2.8 KB · Views: 63
  • img0771vc5.webp
    img0771vc5.webp
    2.8 KB · Views: 74
  • img0772wm9.webp
    img0772wm9.webp
    2.8 KB · Views: 78
  • img0776qd4.webp
    img0776qd4.webp
    2.8 KB · Views: 73
  • img0775bk6.webp
    img0775bk6.webp
    2.8 KB · Views: 73
  • img0773kk0.webp
    img0773kk0.webp
    86.6 KB · Views: 76
  • img0777ke3.webp
    img0777ke3.webp
    83.9 KB · Views: 72
  • img0778ew8.webp
    img0778ew8.webp
    2.8 KB · Views: 70
Well she's all buttoned up. Took her for a quick 10 mile stop and go ride. Clutch DEF. Grabs!!! Not a totally on/off feel, but way better then stock. Chatter is not bad. It chatters a little but that is to be expected from a brand new clutch. I am trying to work the pedal height right now. It releases really close to the floor, so I backed out the adjustor 2 clicks, and it is about mid way now. I don't want to go too tight. Its such a fine line when adjusting these things. Too much, and the TOB rides on the PP fingers, too little and you risk the damn thing not disengaging all the way. I am thinking about getting the LDC freeplay clutch mod next.