Guys with 3650 transmission

[drewzx3]

I bought a used shifter off of ebay and it does not fit my t5 right the ball slips out of the mechanism. If one of yall has a shifter laying around I was wondering if you could measure on the bottom part of the shifter where the pivot is for the shifter itself to the end of the ball on the shifter. thanks

 

[Ordie]

Let me see if I get this straight


You bought a shifter for a 3650, it doesn't fit your T5 and your wondering why it doesn't fit properly?

 

[SilverBullet00]

I think he thinks the shifter he bought is for a 3650, thats why he is asking.

 

[drewzx3]

I think he thinks the shifter he bought is for a 3650, thats why he is asking.

yep thats it.

 

[Mustang5L5]

I bought a used shifter off of ebay and it does not fit my t5 right the ball slips out of the mechanism. If one of yall has a shifter laying around I was wondering if you could measure on the bottom part of the shifter where the pivot is for the shifter itself to the end of the ball on the shifter. thanks

I measured my stock shifter i have laying around.

1.25" from pivot to bottom of ball approximately.



The bolt holes to bolt the shifter down are 5" apart on the sides and 2.75" apart across