Mufflers for the 68

[68blackv8]

just got some tri-y headers for my 68 mustang
now im looking at getting the flowmaster 44 series mufflers but do not know what kinda offset to get? Going for a dual exhasut setup with dumps. I dont want to get them from a shop so im going to buy them online but the offset is ruining for me. What Offset should i get? or how would i know what to get?

thanks

Cliffs: what kind of offset for the inlet/outlet of the mufflers should i get?

 

[chromedog]

if you are going with dumps, go offset/offset. if you are going to run stock type exhaust, you need offset in, center out. you need the offset in to let the muffler sit in the rear seat riser properly.

 

[GNN60GT500]

If you want some offset/ center PM me- I just bought another little project car, and considering it has Flowmaster on it and I work for MagnaFlow-

there are about to be 2 FlowMasters 40 series chopped off my car-

They also have dumps on them all ready as well-

Ill let them go for $50+ shipping if you are interested

 

[iskwezm]

If you want some offset/ center PM me- I just bought another little project car, and considering it has Flowmaster on it and I work for MagnaFlow-

there are about to be 2 FlowMasters 40 series chopped off my car-

They also have dumps on them all ready as well-

Ill let them go for $50+ shipping if you are interested

wish you woulda had this last month .................already bought some

 

[68blackv8]

if you are going with dumps, go offset/offset. if you are going to run stock type exhaust, you need offset in, center out. you need the offset in to let the muffler sit in the rear seat riser properly.

can you post a pic of what you mean?
thnaks

 

[chromedog]

the inlet needs to be offset towards the center of the car... this way the headpipes tuck up into the tunnel nice and neat. you can go either center, or offset outlet, with dumps it doesnt really matter, but most factory style tailpipes use center out to clear the shocks. btw, if you are going with dumps, do you REALLY want 40 series flowmasters? i think the drone will be unbearable. i just put magnaflows, with a full 2 1/2 system, on my 65, and there isnt a sweeter sound this side of heaven! nice deep rumble, until you crack the throttle!

 

[nugget68]

If you want some offset/ center PM me- I just bought another little project car, and considering it has Flowmaster on it and I work for MagnaFlow-

there are about to be 2 FlowMasters 40 series chopped off my car-

They also have dumps on them all ready as well-

Ill let them go for $50+ shipping if you are interested

if he passes on them, let me know what shipping is to 41230, i may want them...

 

[68blackv8]

the inlet needs to be offset towards the center of the car... this way the headpipes tuck up into the tunnel nice and neat. you can go either center, or offset outlet, with dumps it doesnt really matter, but most factory style tailpipes use center out to clear the shocks. btw, if you are going with dumps, do you REALLY want 40 series flowmasters? i think the drone will be unbearable. i just put magnaflows, with a full 2 1/2 system, on my 65, and there isnt a sweeter sound this side of heaven! nice deep rumble, until you crack the throttle!

i was thinking about goin with the new 44 series
what kind of magnaflows do you have?
Flowmasters were just my fisrt choice due to popular oppinon
i myself have magnaflows on my 2000 v6 which sounds good(for a v6)

what would be better....Dumps or Stock setup?

overall the car right now has straight pipes and i just want to sell the 68 asap but wanted to put something under there to make it more sellable...so really idk

thanks