Which way for the air dam support?

[LaserSVT]

Ok, so now that I removed the grill I see the support pieces in the lower grill have ben cut which explaines why at 100+ the lowen grill would come out of its lower center mounts

Anyway I fabd up some new ones and am looking for opinions on location and color. The two pics will show location and yes it will be centered with the line on the outside monted way, just the camera angle made it look crooked. Then I need to decide between a matt black, Sonic Blue or leave then exposed aluminum. The piece I used to make them with I have had for a year or so and has still no signs of corrosion
So what do you guys think?
View attachment 309735
View attachment 309736

 

[BurningRubber]

Outer edge, black.

 

[Black_02_GT]

outer edge, black... i wouldnt put a "bright" color like the blue or silver behind the bumper because it would just look off... i would aim to match the bezels and put em on the outside

 

[LaserSVT]

On the outside Then ther would be a 1" long piece of black metal just sitting there. I would have to make a piece to go all the way around and just dont have the patience/skills/time

 

[40th GT]

outer edge, unpainted looks best to me.

 

[98COBRA281]

outer edge, painted black

 

[BurningRubber]

On the outside Then ther would be a 1" long piece of black metal just sitting there. I would have to make a piece to go all the way around and just dont have the patience/skills/time

Outter edge, painted black...

 

[wyldpny]

I'm going to go way out on a limb on this one and say...outer edge, painted black...

 

[LaserSVT]

Yeah, thats what I am thinking. Wonder if i have to prime them and do a few semi gloss black. Well off to the parts store next weekend It will be over a week till the new tire gets here anyway

 

[BennyBlown2v]

I say just clear coat for protection! Oh, and outer is better

 

[LaserSVT]

Sounds like outter and black is the way to go then

 

[hotmustang331]

Outer and black....incase you were still unsure

Oh and FIX YOUR HEAT EXCHANGER FINS!

 

[LaserSVT]

Outer and black....incase you were still unsure

Oh and FIX YOUR HEAT EXCHANGER FINS!

I tried, it got too banged up to straighten though I think I will paint it black