Question about 3" pipes

kosovo37

New Member
Apr 1, 2007
13
0
0
Hi everybody

I thinking in install 3" Exhaust pipes, but i don´t know if i really need 3" pipes,

Some description about my engine

Trickflow camshaft hydraulic roller tapped stage 2 542/563 lift
Flat top pistons with 0.60 bore ( Keith Black)
Crane rocker arms with 1.6 ratio
Manley Valves with 1.600 Exhaust and 1.94 Intake
Ported piston heads (E7TE)
Trickflow springs upgrade kit
Edelbrock air gap intake Manifold
BBk shorty headers
Msd Distribuitor
Msd digital-6 plus
Holley 750 carb with vacuum sec, double pumper


Do i really need 3" Exhaust pipes? and What else i´m going to need, X Pipes, H or Y pipes
 
Anywhere from 2.5 to 2.75 duals would be appropreate depending on the rest of the setup and how high the motor is gonna spin. How big of headers are you running?
 
2 1/2 inch pipes will be more than enough.

I know you have a 351...but you are still running E7 heads. So while there may be some additional flow from the porting/valves...the 2.5 in pipes will be more than enough.