Fan shroud radiator clips (Lower) - Where to get? FRPP Rad didnt come with any

[MustangLX-5.0]

I need those 2 radiator clips that attach to the lower section of the radiator and support the fan shroud. I had them, with my old radiator but I junked it. I didn't remove them because the new radiator (that I HAD ..and returned) had new clips. I junked the radiator before I returned the Ready Rad garbage. The Ford Racing radiator doesn't come with any... damn it. None of the parts stores have them either. Wtf, now I cannot put my new radiator in. Pisses me off.

Anyone know where I can get any?

 

[skunk21]

50resto

Mustang 86-93 Hardware Kit, Fan Shroud by 50resto at LRS - Same Day Shipping!

 

[MustangLX-5.0]

Thanks.. I knew that actually. but I was more looking for something local so I dont gotta paqy $15 shipping for just an rad access kit. I only need those 2 clips on the top right corner of the pic. Probably will have to hit a scrap yard.

 

[Ozz]

I used some of these zip tie things. They're made to fit through the fins, then you push the backing onto the other side:

 

[87GT Drop Top]

I might have some laying around. I'm not sure if I saved them or threw them out. If you haven't gotten any yet let me know and I will look for them. If I do still have them, I will let you have them for whatever it cost to ship.

 

[ReefBlueHatch]

I went to Lowes and matched some up, just about two months ago.

 

[MustangLX-5.0]

I went to Lowes and matched some up, just about two months ago.

What is the name of that part? You said Lowes has those? These are the double folded clips without a screw hole right?

No luck at scrapyard. There were 2 and the front ends were trashed.

 

[ReefBlueHatch]

Yes, they're made by Hillman and are called u-type speed nuts. I can't remember what size I bought, but I just took the shroud bolt with me and matched it up.

 

[MustangLX-5.0]

Yes, they're made by Hillman and are called u-type speed nuts. I can't remember what size I bought, but I just took the shroud bolt with me and matched it up.

Wrong clips. Those are the top clips that attach the shroud, I need the 2 lower clips that DONT have bolt holes. These are the 2 clips that attach to the very bottom of the radiator, then the shroud slides into them to prevent the bottom from moving out of place.

I'll have to rig something up to keep the shroud from moving or rattling. If someone still has a couple to spare, PM me.