How much for paint? Clearcoat Question

So about 6 months ago, I used Swirl X on the car. Everything went well until I got to the final panel, the driver side door when my buddy came over and rushed me because we had plans so I hurried and pretty sure I burned right through my clearcoat in like 3 spots. Can't really see it unless you stand at about a 45 degree angle to the door. Almost looks like jellyfish and hazy.

Can this be repaired for cheaper or does the whole door need to be repainted? Also, I need my front bumper repainted from all the highway driving while I was stationed in Texas.

What do you guys estimate this will cost for Sonic Blue? A not so common color...I want it done right and matched.
 
Get yourself an online account on a detailing forum such as Autopia.org. Once you register find a reputable detailer in your area. The pro's on that site are absolutely brilliant in their ability to polish paint and bring back a good shine. If you want to pay someone to clean it up it may cost between $150 and $300 otherwise there are good how-to articles on the site that will show you how to properly polish paint. It isn't easy that's for sure, you definitely need to learn the nack and I'd say it is an art form. It's unlikely you burned through the paint using a mild compound by hand though.

Any way to post up some pictures of the damage?
 
If you were hand polishing there it is extremely unlikely that burned through your paint. Your clear coat is most likely scratched up real bad and just requires a good polish to bring it back.

There are 3 or 4 VERY defined spots and they don't look like scratches at all. I will post up some pictures tomorrow.

I'll have to get over on that forum. No more swirl-remover for me though, more work than what it was worth.

Next detail with be dish soap, clay bar, and Meguiars Gold paste, as of now.
 
If your trying to really make your car shine go with something other then meguires. Trust me on this one go with chemical guys or my favorite Adams and be done with it.

I wouldn't necessarily say that, NXT 2.0 for example offers quite a good look and feel for the money. Besides a nice looking polished and waxed paint job is about 90% process and 10% product.

Sonic, I mean it if you can find a couple hundred bucks to have one of the pro's from Autopia polish your car it will seriously blow your mind how incredible they can make it.
 
I wouldn't necessarily say that, NXT 2.0 for example offers quite a good look and feel for the money. Besides a nice looking polished and waxed paint job is about 90% process and 10% product.

Sonic, I mean it if you can find a couple hundred bucks to have one of the pro's from Autopia polish your car it will seriously blow your mind how incredible they can make it.

I just might do that. May be worth my time and effort to just drop it off and pick it up all shiny :D
 
I just might do that. May be worth my time and effort to just drop it off and pick it up all shiny :D

There's a guy in town I met on Autopia and he detailed my dad's car. The entire car was riddled in swirls and the front fender had a bunch of scratches that looked like they were caused by either setting a tool on the fender or from a belt buckle. His car looked like complete chit in the sunlight. Here's a link to the detail... the end result was absolutely stunning...

'08 STS-V Major Paint Correction: Rasky's Auto Detailing

Went from this:

IMG_2775.webp


to this:

IMG_2818.webp


again from this:

IMG_2773.webp


to this:

IMG_2822.webp


before:

IMG_2780.webp


after:

IMG_2827.webp
 
There's a guy in town I met on Autopia and he detailed my dad's car. The entire car was riddled in swirls and the front fender had a bunch of scratches that looked like they were caused by either setting a tool on the fender or from a belt buckle. His car looked like complete chit in the sunlight. Here's a link to the detail... the end result was absolutely stunning...

'08 STS-V Major Paint Correction: Rasky's Auto Detailing

Went from this:

IMG_2775.webp


to this:

IMG_2818.webp


again from this:

IMG_2773.webp


to this:

IMG_2822.webp


before:

IMG_2780.webp


after:

IMG_2827.webp

That is just amazing. I think I might go the professional route.

Im a professional detailer from NY. I will come to YOU if you pay for the plane ticket and add an extra 250$ on top :)
Thanks for the offer but uh...$500ish is more than I was willing to spend :p
You just need a 1-way ticket to get to my car.
 
N8Dogg98, that's incredible. I think I'll need to have somebody do that to my Mustang. The whole passenger's side looks a little sun-damaged, and I'm just starting to get some oxidation of the clear coat on the roof.

Can those guys fix scratches that go down to the primer, or are they just good at polishing the paint that's already there?
 
N8Dogg98, that's incredible. I think I'll need to have somebody do that to my Mustang. The whole passenger's side looks a little sun-damaged, and I'm just starting to get some oxidation of the clear coat on the roof.

Can those guys fix scratches that go down to the primer, or are they just good at polishing the paint that's already there?

The professional detailers only polish the paint. Some will actually fill in deep scratches using touch up paint and a toothpick, and then wetsand and polish it out. However, I've learned from the pro's that many scratches that look like they are down to the primer are actually just scratches in the clear coat. Imagine having a plastic picture frame... if you scratch it with a knife it turns white.

If you look at this picture, the scratches here you could catch with a fingernail and they were white (my dad drew on them with a black magic marker to hide them, so you can't really see how bad it truly was). The detailer said that the scratches were not through the clear and he'd be able to sand and polish them out...

IMG_2773.webp


after, notice how there is not a scratch at all left in the paint, despite the fact that before it looked like the scratches were through to the primer...

IMG_2822.webp


Here's a couple more very impressive details by Rasky (same guy who detailed my dad's STS-V).. this guy is a GD magician

1968 Firebird - Full Wet Sand & Buff

'66 Corvette 427/425 HP - Wet Sand & Buff