Fox w/ Sn95 spindle

[Mustang5L5]

After you tighten them up, put a dab of bright paint on the thread and nut. Periodically inspect and see if the nut moves

 

[roworld]

Hey guys!

I am doing a 5 lug swap on my 90 coupe. I had read that you can change the fox ball joints to SN95 ball joints when doing this swap and you don't have to use the stacked washer method. Can anyone else confirm this? I have stock K-member and stock lower control arms.

Thanks,

Matt

Why not just use the whole control arm. Its easier than pressing out a bj.

 

[mattmcdan]

you can use a 94 or 95 lower control arm? I thought they were different?

 

[Mustang5L5]

They are wider and will make the tops of the tires lean in with 87-93 k members.

Ford racing a arms are the ones to use

 

[Mustang5L5]

If i were to make up some sets, just like the ones in my photos on the other page, would people be interested?

 

[mattmcdan]

I'm good for at least 1 pair.

 

[El_CUCUY]

If i were to make up some sets, just like the ones in my photos on the other page, would people be interested?

I'm down for a set!!

 

[sd331]

contact user name: mustang dave over @ the corral he sells them for 13$ a pair (just like the ones pictured)