We started this project last year but I have not had the time to share the build. At first this looks like an easy project until you start looking a little closer. It has been sitting a long time and at one time outside.
The rear of both frame rails need to be replaced
A little rust in the quarter panels
The convertible has an inner torque box and it was rusted under that
The fender had been patched a long time ago and needed to be fixed
Brian removed the inner brace on both fenders
Sanded to bare metal and I sprayed a couple coats of SPI epoxy primer
The rear of both frame rails need to be replaced
A little rust in the quarter panels
The convertible has an inner torque box and it was rusted under that
The fender had been patched a long time ago and needed to be fixed
Brian removed the inner brace on both fenders
Sanded to bare metal and I sprayed a couple coats of SPI epoxy primer