We are talking 5.0s of course. New to this forum because I don’t own a new mustang mine is actually a 70 but I happen to have a 91’ 5.0. For some reason this forum seems to have more of the newer mustang guys which is great I love all the years. If you guys know if I can throw 94 headers on a 91 that would be very helpful.
Will 94 shorty headers fit on a 91 engine
- Thread starter Jr_palm
- Start date
The sbf head design did not change so yes the header for a 94-5 will bolt up to the 91 engine.
Are you talking about aftermarket headers and are you asking about using the 94-5 headers in a 91 chassis?
Are you talking about aftermarket headers and are you asking about using the 94-5 headers in a 91 chassis?
min talking about BBK shorty headers and it’s going in a 70’ mustang. I’m prepared to do fab work. I actually just bought the headers and they bolt up great!
You bought headers not knowing if they fit in your chassis?
live'n dangerously
I mean have you looked for used long tubes or shorties for a 1970 mustang? And 20 minutes away? for the price I paid for these headers I can clean them up and flip them for twice that. If you add the fact that half the metal on my car is not factory I’m pretty confident I can make any header work
you should, I’d go with a local cerakote guy and use the cerakote high temp. Stuff is good to like 2000 degrees
honestly I’d do it yourself. Just use a cheap gun
They fit the engine no problem. If it has an EGR tube provision on the passenger side header, it has to be capped. I forgot who sells the cap for it. Or just stick a wire feed welder in the hole and weld it closed.
Kurt
Kurt
Surprisingly there was no EGR port. But yes I would have just welded it or capped it.
Similar threads
