Exhaust 94-95 exhaust on foxbody

89notchDude

Member
Apr 11, 2022
43
18
18
central NJ
Hello all. I have an 89 4cyl coupe that im doing a v8 conversion on. I scored a hell of a deal on a brand new full exhaust (mac shorties, off road h, and flowmaster american thuunder will polished tails). They are for a 94-95 5.0. Im not quite there yet in my conversion to mock up the exhaust, but besides the extra bung in the headers, will there be any issues with fitment such as hanger placement and tail pipe length? I figure a fox is a fox underneath.
 
  • Sponsors (?)


but besides the extra bung in the headers
Do you mean the tube for the EGR, just cap it.

Overall length of everything should be fine.

Mustang Chronicle - pg 225.jpg
This is from a book called Mustang Chronicles - the sidebar states the white parts are carryover from the Foxbody to the SN95 chassis. So floor pan and trunk pan should be the same length, so H-pipe and cat-back dimensions should be the same.
 
Do you mean the tube for the EGR, just cap it.

Overall length of everything should be fine.

Mustang Chronicle - pg 225.jpg
This is from a book called Mustang Chronicles - the sidebar states the white parts are carryover from the Foxbody to the SN95 chassis. So floor pan and trunk pan should be the same length, so H-pipe and cat-back dimensions should be the same.
Thanks. That book seems like a great read.... hopefully it bolts right up....