Search results

  1. T

    Which direction to install rods?

    Maybe I'm just up too late, and/or thinking too much about it, but, I wanted to double check. With aftermarket (Modmax H-beam) rods, it doesn't matter which way the bearing tang faces, correct? In other words, the rods can go in with the tangs facing either side of the motor, and it doesn't...
  2. T

    Crankshaft runout/build pics..

    Build pics.. Starting putting my forged 4.6 Windsor bottom end together this evening. Here's a few pics.. Thought I had trouble at first, but, it turned out to be a ding on one of the main caps.. WHEW! :) Travis
  3. T

    Automatic swap?

    Looking to install a built 4R70W into my 04 GT.. The trans has a full manual valve body, so, it must be shifted manually. Since this is the case, can I just keep my manual trans ECU/harness? I know that I'll have to hook up a park/neutral safety switch, reverse lamps, and speedo, but, I should...
  4. T

    2011 GT, knocking on 11's (all motor) :)

    Street/strip footage from last weekend.. Car has 4.10's, Steeda intake, and pump gas tune. YouTube - 2011 Mustang GT, Knocking on 11's (all motor) Had a little bit of wheel hop.. I'm running on some old Nitto 275/45-17's on my Bullit wheels. I think the hop is coming from the lack of...
  5. T

    Video of my '11 GT with 4.10's, intake, and tune..

    YouTube - 2011 5.0 Mustang, 4.10 gears/intake/tune Anything thinking about this.. DO IT! Best money I've ever spent on any of my Mustangs.. I'm amazed at how much this woke the car up! Travis
  6. T

    What block is this?

    What block is this..? RF-3L2E-6015-CB I know that the RF-3L2E-6015-CC block is from 2005+, but, I can't find anything on a CB version. Travis
  7. T

    My TF head/blown 2 valve build up..

    *EDIT*.. I have decided to not use the TF heads.. I can't edit the title of this thread, though.** So, I've pulled the trigger on a few big components, and I'll be starting my build. The car is a 04 GT, with 31K miles, and in excellent shape. I have ordered (or already have): Proline...
  8. T

    FS: Built TH400, JW Ultrabell, SFI flex plate

    I've got a TH400, originally from JW, that's just been freshened up.. It's got a heavy duty input shaft, heavy duty output shaft, new heavy duty clutches/steels, trans brake, reverse/manual valve body, deep sump pan, JW SFI approved Ultrabell (for any modular motor), and JW SFI approved 8 bolt...
  9. T

    Max power on stock PI heads?

    I'm debating on whether or not to pull the trigger on some ported heads, or, if I should go with a set of blower cams. I can't do both.. I am going to run a forged short block, with a Novi 2000, and want to make around 600whp. Can I do this on stock heads, with a good set of cams, and...
  10. T

    FS: TR3650 transmission..

    I've got my original TR3650, out of an 04 Mustang GT.. It has 31K miles on it.. It has no issues whatsoever, and has never seen slicks or any substantial power. I am installing a turbo setup and TH400, so I no longer need this. 350.00 plus freight.. Travis
  11. T

    FS: Viper T56 trans swap..

    FS: Viper T56 swap (partial) 2006 Viper T56 trans, w/6K miles. Immaculate condition.. no grinds, noises, or anything funny. Cobra T56 bell housing 8 bolt flywheel Mcleod pressure plate 1595.00 OBO for everything.. You will need the following to get it up/running in your...
  12. T

    Project 2 valve to 4 valve.. :)

    I'm starting on a project car in the next few weeks.. I purchased a 2004 GT, with 31K miles.. It has a built 2 valve with worked over Patriot heads/comp 270AH cams, and a Reichard sheet metal intake with a Vortech T-trim. The car made 541whp @ 10psi. It's fast, but, I'm not very happy...
  13. T

    Crazy fuel pressure fluctuations..

    My 04 GT that I just picked up is having some crazy fuel pressure fluctuations.. It's got a single Ford GT pump installed, and the car makes around 540whp with a built motor/t-trim. I've noticed that while cruising around, from time to time, the fuel pressure gauge will start bouncing...
  14. T

    ProMotion 3650 with SFI adapter/bell..

    Thinking about upgrading to the 750hp ProMotion trans, and new SFI adapter/bell housing. Is anyone running one of the ProMotion 3650's with some substantial HP, and track abuse? I had a Viper spec T56 in my old car, but, I don't feel like spending 3-4K this time around if I can avoid it...
  15. T

    Stangzone (Florida) FRAUD!

    vin number locations - Lightning Forum | LightningRodder.com Guy buys a "2002 Lightning" from a shop in Florida called "Stangzone". Well, apparently, the owner pulled a fast one.. Swapping the VIN number and title from a 2002 F150, over to what is probably a stollen (or wrecked) Lightning...
  16. T

    WAP aluminum block TQ specs..?

    Looking for the TQ sequence/specs for the WAP aluminum block.. I have the specs, I believe.. 60ft lbs for ARP studs (both sets) 30ft lbs/90 degrees for side bolts I'm assuming that the side bolts need to be TQ'd down first, to align the caps..? I just don't want to guess.. ;) At the...
  17. T

    Slicks/skinnies offset question..

    I'm ordering a set of AR Track Star 2 piece wheels.. I've got 15x4's for the front with 1.5" of back-spacing. The rears are 15x10 with a 6" back-spacing. I will be running a 28x10.5" slick.. Does this sound right? Just wanting to double check my math before I order them. Travis
  18. T

    Picked up my twin turbo kit today..

    My 9K budget just went through the roof in the quest to build my track car.. lol.. I picked this up this evening.. 67mm compressor wheel with a T350 turbine in a .82 A/R T31 (T3 based) exhaust housing. Each of these will make roughly 650-700whp, so, that should put the rough...
  19. T

    Project- 9's for 9K.. :)

    We're starting a build on a '02 GT that we picked up last week. I got a sweet deal on the car.. 12K and it has the following stuff done already.. Vortech V2 SQ blower (2k miles) 12lb pulley with meth injection Comp 274 Extreme's (236/240*, .500" lift, 114 LSA) Comp springs/retainers BBK...
  20. T

    My (soon to be) new toy..

    I'm picking this up in a few weeks for 16K.. :) Motor MMR 4.6 Street Mod 900 block ARP stud bolts Forge cobra crank Mahle pistons Manley h-beam rods ARP main rods Stock cams, heads and intake. Power adder GT40-50 turbo running 13-15lbs of boost depending on weather...
Top Bottom
Back
Forums
Menu