Search results

  1. Bullitt

    Weak Airflow From Hvac

    Been a long time since I've posted here, but finally getting my '67 A/C in working order (hasn't been functional really since I've had it). My car is a factory A/C car so it has the 3 speed switch. The ductwork is all in good shape and I haven't been able to identify any leaks. The vacuum...
  2. Bullitt

    86 vs 90 O2 Sensors

    Short time ago one of the O2 sensor plugs got onto the headers and melted. I bought some harness extenders (for a 90) in order to splice in new connectors. When I got them home though, realized that the "90" O2 harness I had has the '86-earlier style plug (3 prong) instead of the 87 and...
  3. Bullitt

    EFI - Using WOT Cutout Relay for AC

    Well I'm at the stage in my re-wiring project on the car where I'm finally starting to make some terminations and finalize things. I converted my '67 to EFI (using a '90 Mustang harness with A9P computer) a few years ago and things have worked great; however in that time I've never had the...
  4. Bullitt

    Painless 20121 (67 Mustang) Harness - Disappointed

    I just received the Painless 20121 harness that I ordered from Summit to re-wire my '67 Mustang and have to admit I'm a little disappointed... Some background. Car is a resto-mod w/ fuel injection. I was tired of tracking down ****ling electrical issues, so bit the bullet a few weeks back...
  5. Bullitt

    KRC Pump w/ Factory A/C

    I've recently swapped out my manual TCP rack for a power unit (thanks bnickel!!). Now I'm trying to figure out the pump. Basically narrowed it down to a GM TC pump or a KRC pump. I'm not interested in the factory pump for various reasons. Does anyone have photos of KRC pumps installed...
  6. Bullitt

    Taurus Fan Wiring Problem

    I've had a Taurus fan in my car for a while now, but just had the low-speed hooked up to a manual switch. In my quest to make this automatic, and add in a manual override for high-speed (also will tie in the A/C to this), I did some searching and came across a wiring diagram that I modified...
  7. Bullitt

    67 Upper Console Restoration Question

    So I've spent the last few days taking my time and doing a careful restoration of my upper console... I reassembled it tonight and everything was smooth except for the new map light switches. There's daylight where I'm pretty sure there shouldn't be any!! Previously there was a...
  8. Bullitt

    Type of Nail Gun for MDF Console / Speaker box?

    Looking at making a custom console for my car. Any suggestions on type of nail gun be best? Would probably use it for some other cabinet / furniture construction too... I'm assuming a 16 gauge brad nailer for nailing the MDF together? 18gauge stapler for upholstery on it? Thanks!!
  9. Bullitt

    No Oil Pressure - Fresh Rebuild

    Just got done putting together an 85 roller 302 and got no oil pressure on startup. What was done: Block decked, new cam bearings, new crank bearings, new pistons, new rings, new lifters. Same heads and oil pump as when it ran before. Everything went together real easy except for one...
  10. Bullitt

    Windshield Installation Cost

    Got a couple leaks in my front windshield and also need to have new moulding clips installed (clips came out with the moulding when it was stripped to paint). A local Mustang resto shop quoted me $650 to do it, which seems crazy to me! I had the windshield installed before at a glass place...
  11. Bullitt

    Fuel Gauge Sending Unit - Voltage?

    I've done the usual checks to see if the gauge or sending unit is the problem: Grounding wire to chassis doesn't make the gauge go to full Different sending unit doesn't work either I've checked voltage at the sending unit wire with power on. I get 5.5 Volts. What should I be getting...
  12. Bullitt

    Miscellaneous Parts - 67 / 68s

    Cleaning out my garage and have a bunch of parts (some are "universal" ) Richmond 4.10 gears for Ford 9" (good used) - $100 Universal Driveshaft Safety Loop - $20 67 Mustang Timing cover for 289 / 302 (some holes need to be tapped) - $50 67 / 68 Mustang Bumperettes (need a good cleaning) -...
  13. Bullitt

    Odd Dyno Results

    I converted my car to EFI not too long ago and only recently got a chance to get it on a dyno to see how it's doing. Here are the basic specs: 306 w/ ~ 10.5:1 compression TW Heads (upgraded valve springs), not ported Lunati roller cam 51017 Victor EFI intake 30 lb/hr injectors Pro-M...
  14. Bullitt

    Wiper Motor Vendor Recommendation

    Need a new wiper motor. John's Mustang (local here in Houston) has them for like $80. Autozone lists one at like $50. Anyone know if there's a significant difference in quality? Know you often get what you pay for, but I'm wondering if the big difference in price is really justified...
  15. Bullitt

    Odd Turn Signal Issue

    Did a search before I posted, but couldn't seem to find a similar set of symptoms.. What Doesn't Work: Driver's side Turn Signal when activated by turn signal switch (on solid) What Does Work: Emergency Lights (both) Passenger Turn Signal (flashed fine with switch). Parking Lights...
  16. Bullitt

    Backup Lights - 5spd Issues

    So the 5spd swap was done on my car years ago, but the lights have never worked for very long and right now aren't working at all... I'm fairly certain the switch is hooked up correctly as I get 12V at the lights (with both lights unhooked). Now, if one light or the other is hooked up, not...
  17. Bullitt

    Need to Bench Bleed MC after Adjust Prop Valve Install?

    Is there any need to Bench Bleed a MC after installing an Adjustable Prop valve? On our '85 GT (all stock brake parts) we gutted the front of the MC, replaced with the Ford plug, installed the adjustable valve and now we can't get the brakes to bleed right. It may be a combination of...
  18. Bullitt

    67 Deluxe Door Courtesy Lamp Harness

    I've found some online at the exorbitant price of $32+ each. My lovely body shop clipped these and then threw them away when they had the doors off the car to paint. I don't have any issue doing the wiring, but I'm at a loss as to where to find similar grommets. Just need the door lights...
  19. Bullitt

    71-73 Gas Tank Dimensions

    Any of you 71 to 73 guys willing to take some rough measurements of the gas tank? Looking for length, width, height, and approximate location of the filler neck and sending unit holes in the top (if you've got the tank out that is). I know they use straps instead of the earlier model bolt...
  20. Bullitt

    Need AC Wiring Diagram

    Need an AC wiring diagram for a '67. I've got a Sanden compressor and need to get it wired in properly with the evaporator core switch... My car had original in-dash AC and everything is factory except the compressor. Wiring diagram help? Thanks!
Top Bottom
Back
Forums
Menu