Search results

  1. L

    Ideas please!!!!

    Alright here is the deal. I installed the vam on my car yesterday and had no luck. All sorts of pinging no matter what i did. Had to go to my second interview and put everything back the way it was. My friend and i messed with it today because i was having problems with the stock setup. I...
  2. L

    Long read w/Q's

    What's up everyone? Alright I'll try to make this somewhat short I have tried some searches but didn't really find anything that give me any ideas or any help. As you all know i just got done my swap of t/c suspension and rear w/disk. Well going from 7.5-4.10's and 15" rims to a 8.8 373's...
  3. L

    Rear upper control arm interchangeable??

    Just wanted to know if the upper control arms from a 88' T-bird are the same as an 88' stang. My girlfriends car has a bad upper control arm that broke apart where the bushing goes into and i have a coupe for parts and was going to swap it out. Are they the same? Just wanted to know before i...
  4. L

    Need camber help please!!!

    Hey all i am in the process of drilling and grinding metal to set my camber right for the TC control arms. Now my question is!! Do i just want to grind out the grooves where the two studs come up through? Or can i also drill out the stationary stud hole also? The reason i ask is I am about out...
  5. L

    N/A People!!

    just wanted to know what the N/A people have for mods and what type of motor work they have done. What you see in my signature is what i have done plus a roller cam. Also who is running a turbo on a 2.3 without forged pistons and at what psi. I'm looking to squeeze whatever i can out of her...
  6. L

    Ram air!!!

    Hey all it's been awhile i have been a little lazy due to hardly any work. Interests rates down and people have money to pay for there cars. But anyways i been trying to get myself motivated and came up with a ram air setup. I know this will only help for top end but i figured what the hell...
  7. L

    Need help with a part!!!

    What's up? I was wondering if anyone could get me a part# for a cross pin for a 7.5 rear? I put 4.11's but had to grind the pin to give me room to put the clips on the axle. Never doing this before i notched the wrong sides of the pin now causing a little travel side to side with the axles. Ive...
  8. L

    Svo control arms!!

    Just wanted to know if aftermarket control arms will fit on this thing? Can't find any oem replacements and found a kit for the price of one control comes with coil overs and parts. Plus i have the original konis will coil overs fit on here?? Thanks any info Asap would help thanks!!! I made...
  9. L

    Lets try this again!!!

    Hey all I figured i would try another post just can't seem to get any help anywhere!! I got everything wired up now but i can't pull any codes from my computer soon as i go to hook up the test plug it just stays lit up and the beeper is constant even with the car running. Also when the key is...
  10. L

    Another problem

    Well as you all know i rewired my 84'svo with an 89' harness. I finally got her running well lastnight sitting here idleing about every 5 min or so give or take. It would just lose power for a quick second. So tonight i put a volt meter on it and alternator was reading 14.33 then when it did...
  11. L

    Taurus Alternator!!!

    Hey all just wanted to know if the taurus alternator is the same as the 3g? i saw some pics and tried to compare. They look the same to me!!! Also is the alternator the same on a mark VII? I think my external regulator is going. Was coming home from seeing my daughter in my svo and it looked...
  12. L

    Read this!!!!

    Hey all i got the svo running finally i was checking the coil because i wasn't getting any spark last night and a couple of other things. Well got up this morning and figured i would just keep messing with it so i took the coil and distributor from my 89' and threw them in and viola it started...
  13. L

    Black boxes!!!

    I was wondering can i eliminate these boxes and what do they exactly do??? One had two plugs roughly 8-10 wires each plug and went side by side into this box. one plug to the harness the other out the firewall and into the fender. I'm guessing thats where they put cruise control. I don't need...
  14. L

    Really need help now!!!

    hey all whats up?? Ive been rewiring and making my dash work out of my 89'. Anyways make a long story short i pretty much have it done but have the same problem as before turn the key to ignition and eec,fuel pump relay start buzzing and i think the injectors got a faint pop too!! The tach...
  15. L

    Interior pics!!!!

    Hey guys i need some pics of interiors I'm in the process of putting all the wiring dash and center console from my 89' in to svo It's blue and i want to paint it!!! But i want throw some black in ther my interior is charcoal grey but i was thinking about painting some misc. pieces black. Was...
  16. L

    You believe this!!!!

    I know this aint the section but i just wanted to share a gripe. I been running around all week trying to find wire diagrams and someother parts. I think i wasted more overpriced gas then anything. Finally today i got reffered to a plce that has the all data or mitchell on demand And thought...
  17. L

    Dash!!!

    Hey all it's me again. Well the wiring is still going!!! Now i need to either find another connector for the svo thats good seeing how the wires were broke in the shielding right next to the plug. So now i'm just going to throw another project in the mix and add a newer style dash alot easier...
  18. L

    wiring manual

    Hey all had a post for some wiring info but no help!! So I was wondering about this vacuum and wiring manual what yrs does it cover,where can i find and whats the name of it??
  19. L

    SVO BALLJOINTS!!!

    cAN SOMEBODY TELL ME IF THE FRONT LOWER BALL JOINTS CAN BE CHANGED OR DO I HAVE TO REPLACE THE WHOLE CONTROL ARM??
  20. L

    Can't find!!!

    Hey all I'm rewiring a new harness into my svo most of the wiring is corroded and looks like some of it was giving me problems. but anyways i have done my searches and went to other web pages i have a couple of printouts for the turbo coupe a pinout sheet for 85-89 merkur,83-86...
Top Bottom
Back
Forums
Menu