N/A People!!

[latroca1]

just wanted to know what the N/A people have for mods and what type of motor work they have done. What you see in my signature is what i have done plus a roller cam.
Also who is running a turbo on a 2.3 without forged pistons and at what psi.
I'm looking to squeeze whatever i can out of her.
Any suggestions or ideas would be apprecciated.
Thanks!!!!!!!!!!

 

[JamesBaumann]

Don't run a turbo without proper forged pistons found in turbo motors. Looking at the current mods you have already made to your n/a, there isn't really too much else you can do to her. Just tear into the engine and start putting in performance parts.

 

[thorin]

do all those mods make a measurable difference? or just an ass-dyno difference?

 

[freakintiger]

Port a head to put on your car. I got a brand new head off eBay(cheap); I'm going to disassemble and port it out to improve air flow as much as possible. From what I read the key is unshrouding the valves, then stuffing in larger valves and a longer duration cam.