Search results

  1. M

    Pro Flo PFT-77 Calibrated for 24

    I am needing the MAF curve for this MAF sensor. I bought this car recently and it has this MAF sensor with Yellow Top (19lb?) injectors. I have searched the internet and found nothing. I am hoping someone can help me out here. Thanks in advance!
  2. M

    Drivers Door Rattle

    I thought I had seen something like this before, but has anyone experienced the drivers door rattle when the window is all the way up. And if so, did you fix it and how. Thanks.
  3. M

    Radar Detectors and License plate cover

    I recently got a speeding ticket and would like to prevent this from happening again. I was wondering what everybodies opinions were on different model detectors (or jammers) and what you all think about lisence plate covers, I remember reading somewhere (can't remember where, you can tell me I...
  4. M

    Front Wheel Bearings

    I have lowered my car awhile back and I was wondering if anyone has had any problems w/ there front wheel bearing going out at 50K. At first I thought it was the C/C plates but it is only coming from one side(drivers side) It always sounded suspension related until this morning when I got in...
  5. M

    Update on Kenne Bell 6psi poor dyno results

    Hey everybody, beggining of this week I posted that the results of my 6 psi Kenne Bell. Well I just got done talking with Ken at Kenne Bell and he is sending me a 7 psi pulley, wrench and a switch chip with two different calibrations to get me were I am supposed to be. He is shipping this...
  6. M

    KB Dyno tonight

    I am going to the dyno tonight w/ my newly installed Kenne Bell 6psi nic kit. The only other mods that I have is a CAI and 40s 2 Chamber flows that should affect the hp. I will post the number tomorrow. Also, I have been trying to post some pictures from the my install and lowering, could...
  7. M

    Kenne Bell Install 10 hours!!!!!!! Done!!!!

    This past weekend I installed my Kenne Bell 6 psi kit. For the most part the install was straight forward. A couple of steps are not necessary ( fuel line disconnect, some grinding). Because mine was a 2001, for some reason, Ford did some different things to my block (some bosses and fuel...
  8. M

    Gapping Spark Plugs

    I just got some Denso U-groove spark plugs. I got them one range cooler for my Kenne Bell 6psi kit. Kenne Bell states that they are supposed to be gapped at .035" I got them in the mail and they are at .028" What is the proper way of gapping a plug. And how important is the gap being that...
  9. M

    Strut tower brace, 96 -v- 01

    I am wanting to buy a strut tower brace, I found one from a guy in here, but his is a 96 GT, whereas mine is a 01 GT, will it fit or not. Thanks. :D
  10. M

    Good News, I ordered Kenne Bell, they ship one week.

    I ordered my Kenne Bell last week Thursday, I called them today, they shipped it today, This rocks. The last order they got in must have caught them up. I should have it by next week and installed the following weekend. :banana: :banana: :banana:
  11. M

    Mustang Clubs and St. Louis area????

    I was wondering if anybody knew of any Mustang Clubs in the St. Louis area. I will be getting my Kenne Bell soon and was wondering if any clubs had any deals with local Dyno places. I would like to get it done before and after (along with A/F ratio). All responses are welcome. Thank you.
  12. M

    Just installed my Steeda Tri-ax

    What a breeze, this was probably one of the most easy installations I have ever done. And man what a difference, WTF was Ford thinking. This makes one hell of a difference in shifting. Now it feels like a sports car. :D :banana:
  13. M

    Which fuse?

    I am preping my car for the supercharger and was wondering if anyone has done anything with there traction control, I am going to try and get a hold of Kenne Bell and have them disable it, but if for some reason they can't is there a fuse to pull. I have looked in owners manual and the fuse...
  14. M

    Kenne Bell Baby

    I just put my order in for my 6 psi Kenne Bell kit, Boost Gauge, Fuel Pressure Guage. Also ordered my Steeda Tri-ax shifter, and dash board guage cluster. I am so F ing excited, but the people at Kenne Bell seem like morons. They could not give me definitive answer on anything. I see what...
  15. M

    Supercharger clips and sound

    I just had the privelage of watching some vid clips on some KB blowers. All I can say is :jaw: (Holy Sh&*) I can not believe the awsome sound coming from the blower. I would like for any one with clips of blowers to post them so I can get a feel for what they all sound like. I will most...
  16. M

    What is the best shifter for the money

    I will be ordering my Kenne Bell 8psi kit here in a couple of days. I also wanted to upgrade my shifter with something with stops. A short throw would also be very cool. I have looked on Hurst site but found nothing that I liked. I don't really know of any other brands that are really good...
  17. M

    C/C plates, bump steer choices

    Hello, I will be installing springs into my Stang in the next couple of weeks. I am only lowering is ~1". My workplace (Hunter Engineering) wouldl like to do some testing on my car and offered to by C/C plates and bump steer (possibly) kits for my car. I was wondering what would be the best...
  18. M

    Installation of new gears

    All this talk about rearend gears really has me thinking I want to install some 4:10's. One problem, I have never done this and don't know the first thing on installation. Is this something that people do on their own. I am quite mechanically inclined and do all my own maintance and upgrades...
  19. M

    Stock 4.6L SOHC w/ blower, how much will it take

    I will be putting a blower on my stang soon but I am trying to figure out how much will the stock internals(including Transmission) take before I start breaking stuff. 99% of the time is done off the track. One of my co-wokers has a GTS with 150 shot of NOS and he said that he has launched...
  20. M

    Vortech S trim-v- Vortech SQ trim

    In the near future I will be purchasing a vortech supercharger (w/out intercooler). I have been looking at the 4VFL218-050(S/SQ). I would like the supercharger whine but am worried about it being to loud after awhile. If any one could tell the difference in sound between these two trims. And...
Top Bottom
Back
Forums
Menu