Search results

  1. aj1025

    Will removing front &rear sway bars and quad shocks improve times?

    I'm just curious if by removing the rear and front sway bars and removing the rear quad shocks if this will improve my times at the track. I saw a post on the Corral Forums about a guy with an auto who had this in his setup, along with other mods and he was running in the high 12's. I know...
  2. aj1025

    Will i see an increase in HP going to full 2 1/2 inch exhaust?

    I currently have a 2 1/2 inch off road h-pipe exhaust from the exhaust manifolds to the mufflers, and the exhaust from the mufflers to the tailpipes is all factory 2 1/4 inch exhaust. My question is if I get a full cat-back exhaust that would make all of my exhaust 2 1/2 inches including new...
  3. aj1025

    How high can i raise the rev limiter on my auto.

    I would like to raise the rev limiter on my 02 auto gt, right now the rev limiter kicks in @ around 5750 rpms, i'm wondering can i see a benefit of raising the rev limiter on an auto gt, and how high can i raise the rev limiter without damaging the engine or tranny? Could i raise the rev...
  4. aj1025

    Does anybody in east tx. with a programmer want to make some money?

    I would like to know if anyone who lives in the east texas area with a hand held programmer as for instance, The Hypertech, etc. would like to make some money by progamming my car and i would pay u a reasonable amount. I am willing to also drive to your location or meet you half way, what ever...
  5. aj1025

    Has anyone removed just the spring isolators and re-installed their factory springs?

    I'm wondering if i can just remove the isolators from the factory springs and see a drop of atleast half an inch. I know that i should buy some lowering springs, but money is tight and this would be a free mod, just a couple hours of my time, no biggie. I 've seen alot of post lately talking...
  6. aj1025

    Has anyone heard of a fuelrail restrictor,does removing it increase HP?

    I saw a post somewhere about a guy with his mods which included a removed fuelrail restrictor. Has anyone heard of this restrictor in our 99 and up cars, and by removing this restrictor will we gain any HP. Also can someone describe exactly where it's located in the fuelrail and how to remove...
  7. aj1025

    Has anybody had side exhaust put on their car without buying an exhaust kit?

    I would like to put side exhaust on my gt where the exhuast pipes would come out in front of the rear wheels. I know they have kits out there but i don't have the money for what those cost, i'm wondering has anyone had a muffler shop custom make the exhaust come out the sides. I've seen one gt...
  8. aj1025

    Can i drive my auto after having gears installed but not having the ECU reflashed?

    I 'm going to order some 4.10 gears tommorow and found a place to install them for $200.00, i'm just wondering can i drive my automatic gt around with just the gear change until i can have the ecu reflashed, or will the car not shift right? I know the speedo will be affected until the relash...
  9. aj1025

    Has anyone removed there air filter at the track and seen better times?

    Just curious if anyone has done this, removing there air filter at the track and seen better times. I know that i would be taking a chance of trash being sucked up into my motor, but would just like to know if this could help. I currently have the factory air box with the silencer removed and...
  10. aj1025

    Can I have a gear change without a chip for my auto?

    I really want to get some 4.10 gears for my auto gt, but can't really afford to buy the gears+labor+having either a chip or computer reflashed, this will add up to roughly $550.000 or more. My question is, can i just have the gears installed for now and have the speedo off for awhile or will my...
  11. aj1025

    Ford said they wouldn't change my rear gears.

    I e-mailed my local ford dealership service dept. and asked them about changing out my gears, because a guy from canada had his changed out at his local ford dealer for about $200.00 U.S. dollars, which was about 4 hours of labor, not a bad price. So i e-mailed my ford dealer about changing my...
  12. aj1025

    Pep boys has a set of Futura 275x40x17 fo$100.00, each is this a good tire

    I just walked into pep boys to look at tires and they had a set of four Futura's 275x40x17 for $100.00 each, I couldn't believe it, i talked to a guy that worked there and he said it was the last set. My question is, is Futura a good performance tire, I don't need to buy a knock off tire, does...
  13. aj1025

    Is there an aftermarket hood scoop that faces the windshield for the gt hood?

    I was just wondering if there was an aftermarket hood scoop that would fit the contours of our hood but having the semulated opening towards the windshield. I think it would look alright, just me. I was also wondering if a good body shop could make our hood scoops work for this application...
  14. aj1025

    Who makes this c pillar scoop, does anyone know?

    I know this should be in talk but more people come in here and i thought i would get more feedback. Anyway here's a pic of the rear c pillar scoops i'm talking about. Does anybody know who makes these and how much they cost. :shrug:
  15. aj1025

    What would my dyno #'s be if they were standard #'s

    What i'm curious about what would my dyno #'s roughly be if the dyno measured by the standard rating. My #'s are SAE- 243 Hp and torque was 287 these numbers are SAE what would they be if they were converted to the standard rating, just curious. Also what numbers do most dyno's go by sae or...
  16. aj1025

    Rear seat removal rear seat delete questions????

    I removed the bottom portion and the back support seat cushions, i need to know do i have to remove the seats that hook up to the seat frame and re-install the seat frame back in the car then take my measurements. I'm doing the rear seat delete, and i can't see re-installing the seat frame...
  17. aj1025

    Found these nice custom rear seat delete kits by accident

    Check out these nice custom rear seat delete kits this guy is making himself way better price and quality. He has the letters cut out in the back seat area that say 4.6L or SVT or even Saleen or GT. He cut out the wood in the shapeof the letters or numbers and puts plexiglass behind the cut...
  18. aj1025

    Just had my car dynoed, are these #'s good for my mods?

    I just got home an hour ago from Lewisville texas. The place i had my car dynoed is called speed works, bunch of good guys there, it was a long drive but worth the $45.00 for three pulls. Anyway i have no way of posting my dyno sheets, but with the mods that are in my signature are these #'s...
  19. aj1025

    Valve cover leaking oil, what's the dealio.

    I took my valve cover off last weekend on the drivers side to paint it, anyway i put the cover back on and tightened all the bolts and i cranked it up and no leaks. But when you drive the car and stop and look under the hood i can see oil all over the lower intake by the egr valve. Today i...
  20. aj1025

    New appearance mod, if you have the bullet gas cover, check this out.

    I just got the idea last night that my bullit gas cover door needed something, kind of like the old mustangs had the mustang emblem on the gas cover. So what i did was go to the ford parts house and asked if they had a v-6 mustang passenger side fender emblem, luckily they did. The emblem has...
Top Bottom
Back
Forums
Menu