Search results

  1. squeak93

    Progress Thread The Mach Returns - Update/build thread

    About 11 years ago Iet this beauty go and regretted it. We just had our youngest and my company I worked for sold for the 4th time. Jan 9 was her birth date and we had new - TERRIBLE - insurance. We got a 12k bill for that and well given the uncertainty and huge bill - it was obvious this...
  2. squeak93

    Tuners come on inside

    2003 Mach 1. Classic bolt ons, sct4 custom tune from reputable tuner. (yes not quite svt but also not 2v) Bolts ons include: (for tuner purposes) JLT fenderwell CAI - dry filter 1/2 intake lid spacer Factory manifolds with o/r Mach prochamber (oh that sound!) Mac cat back 4.10 gears 305/30/18...
  3. squeak93

    Garage Project.

    Now that the car can get out of its own way it was time to rebuild my trusty work bench. I built the previous one 6 years ago very cheap and quickly. It was beaten down and worked over. Time for an upgrade.
  4. squeak93

    Progress Thread 1998 Gt Procharger Build--dyno And Track Numbers Inside

    1998 GT Trick flow 1 cams pi intake. Pro products plenum and tb 4r70 with shift kit 3.90 gears O/R x pipe and slp lm1 cat back Sct 3 tuner Other various items. Lots of suspension pieces. Anyway I went to the track Friday night. 3500ish d/a (950 actual elevation) so real bad air and it went a...
  5. squeak93

    This Followed Me Home Today

    I sold me fox coupe last year (regretted it instantly). So my rebound car has arrived. This is an absolutely horrific pic but you get the idea. :) I'll get it cleaned up (yes, I'm anal enough it'll be cleaner than this) and snap some proper pics here quickly. Specs (all the I can...
  6. squeak93

    Bought Me A New Work Horse

    Well the wifey and I have been debating the upgrade for a little bit now. The final straw in the favor of the upgrade was when we confirmed to a family trip to CO/UT with a travel trailer (rented). We had a very nicely optioned (loaded) 2013 F150 Scab FX4 with the 5.0. It tows around here as...
  7. squeak93

    Electrical Codes

    I pulled the KOEO codes and came up with 10, 87, 95 . Car is a bastard child. 92 LX orig 4 cylinder car. Has full wire harness/drive train from a 91 lx. All items work as they should to the best of my knowledge. NO hacked up wiring anywhere (Thank God). Has 5.0 AOD combo in it. Correct...
  8. squeak93

    Best Valve Spring Compressor For The Money

    I'm gathering parts to build my spare 5.0 with gt40 heads. I want to swap the springs to support the f cam and was wondering what spring compressor everyone used or what was my best bang for the buck? Harbor freight tool? Sears? Amazon? Just want to know what others are using.
  9. squeak93

    Fox Steering Wheel Vibrations

    I wanted to make a separate thread from my build thread as sometimes help issues can get overlooked easy. Anyway, 92 LX coupe. 5 lug swap, 94 spindles, pbr front calipers, new rotors, new moog ball joints, new moog tie rod ends, new way bar end link bushings, new struts (just oe...
  10. squeak93

    Progress Thread 92 Coupe Resurrection Thread

    So to start this thread off. Less than a year ago this car had a 6.0 LSX with a massive turbo and was notorious on hillbilly videos (or what ever that is) as well as some 1320 videos in street racing action. A friend of mine had it and it was nasty. He parted out the combo and sold the car as...
  11. squeak93

    Bogart Wheels

    Fits 05+ Mustang. No curb rash, all lug nuts (longer ones for rear axles with longer studs). Only 2 center caps. 17x4 RT fronts with 26 7.50 hoosier radials. 15x10 6.5 back spacing GT rears with new 28 11.50 Hoosier drag radials. $1500 FIRM. That is what I paid and what I want back out of...
  12. squeak93

    1996 Cobra-- Cranks but won't start

    As stated: 1996 Cobra, cranks, fired one time and sounded terrible for 1/2 a second. Then nothing. Just cranks. I just bought the car, the PO thought the engine was blew (said a compression check said #5 had low compression) but even with that, the engine should still run, so there is another...
  13. squeak93

    Zex install msd windown switch

    I've already searched and didn't find what I needed. 98 pi swapped gt. Kit is installed, wired and comes on. The very first time we flipped the switch the "teach" it the tps range for the wot switch, it acted as though it had already "learned" the values. We tried to press the button on...
  14. squeak93

    Pi swap guys, stuck on the dip stick

    So we pi swapped a family members 98 gt. Installed pypes long tube headers as well. I cannot get the dip stick tube to go into the block fully therefore the dip stick itself will not go and feels as if its in a bind. there are no kinks in the tube itself, we only cut off the flange that holds...
  15. squeak93

    Power Steering Leak

    So I Have a nice little puddle from time to time below my power steering pump. I have norrowed it down to where one of the lines that goes into it. Seems like the seal is leaking? Do they have a rubber o ring on them to seal the line to the housing? The line pivots and such but the fitting...
  16. squeak93

    Another hanging rpm thread

    So my dumb ass had the bright idea to polish my plenum and throttle body. They both had a TON of oil, carbon and other chit in them from 100K+ miles. So I got it all cleaned up and done, carbon removed and everything clean.... Now the chitty part..... My rpms don't drop while under a load...
  17. squeak93

    Track times

    Well, I made it to the track this past weekend. Friday night, track level about 900 foot, temp 45 degrees, dew point had to be 44, real damp and nasty night. It had rained all day before but they were able to get the track dry and safe. So a terrible night to be racing for best et's. Anyway...
  18. squeak93

    Caster/Camber

    So I just got my car aligned w/stock cc plates on and the upper strut bolt hole elongated so allow more movement (sorry not the best way but cc plates our out of my budget right now) So they were only able to get -1.25 instead of the -1.00 I wanted on the camber (top to bottom movement, I get...
  19. squeak93

    Ball Joints

    So I replaced my driver side front lower ball joint last night. It was really worn out upon inspection. Now my issue is that I have a TON of wheel movement now. If I stand perpendicular to the wheel/car and reach inside the fenderwell, I can grap the opposite side and pull towards me, It has...
  20. squeak93

    Code Help

    I got the car running this past weekend. I drove it for 80-90 miles trouble free. Then when pulling into a parking lot I scraped a little on the exhaust. Then my cel came on. I thought that maybe I cut an 02 wire or something but I can't see anything hanging down (will jack up tonight to...
Top Bottom
Back
Forums
Menu