Search results

  1. O

    275 35 17 on a 10.5 wheel?

    Is anyone running a 275 on a 10.5 wheel?
  2. O

    Finally found a car 03 (new to me)

    Hi I I have been car shopping finally found one that was in my budget and looks Can you guys tell if the Owner was telling the truth.or Does have engine engine that's got more power than the GT.? I'm a older push rod guy./
  3. O

    Changing transmission fluid in 94 V-6

    Is there a drain plug on the converter in a 94 3.8 ? If not can I unhook a transmission line start it up and more than just removing the pan?
  4. O

    94 Mustang alarm question

    I have a 94 mustang that when I installed fog lights all the wiring was already there. I installed a factory switch,relay and the lights and they worked. With my key less entry key fob if i press the lock button I can get the horn to bark like setting the alarm. Thing is I don't have a working...
  5. O

    Questions About The 1994 1995 Cobra

    Hi, I have been looking at the 94 95 Cobras and some have a pony in the grill and some have the cobra, Also some have the SVT emblem on the back and some do not. Pony in the grill,, I just got done talking to a guy that has a 94 that he got new and it has the pony. Talked to another guy...
  6. O

    radiator to block clearance question. 94 95 compared to a fox

    Hi Guys, Hey I have a 91 fox with a blower and I would like to move up to a 1994-95. I plan on keeping the blower and installing it on the newer Mustang. I would like to know if anyone knows if there is more or less room between the block and radiator on the 94-95? With the set up I have...
  7. O

    Cooling system problems radiator cap question

    Hi, I have a problem I have never seen before. I can't get my cooling system to hold any pressure to speak of at all. And it wants to kick the coolant out. I was working on it getting ready to make a overflow bottle and I noticed that when I squeeze the upper hose to see if there is any...
  8. O

    Rear hatch striker problem

    Hi, I have a 91 hatchback and the plastic that goes around the striker is wore out. At first I could just turn it until the bad part was on the top and bottom instead of the sides and it would close just fine. Anyone know where to get a new one or what works good as a replacement? looks like...
  9. O

    question about GT-40 heads

    Hi ,, I'm looking thinking of picking up a set of GT-40 heads. Not the GT-40p If I run the the GT-40 heads on my 91 5.0 will the head bolts be to small and require the adapter washers? I'm told that with the GT-40p heads that there may be a problem with the way the plug angle and the...
  10. O

    Ok to run trick flow twisted heads with stock pistons?

    Hi, I am looking at a set of used Trick flow twisted heads. Will there be a piston / Valve clearance problem if I run stock flat tops w/ valve reliefs? The heads have 202 and 160 valves 60cc combustion chambers. the cam will be a ford F303 512 lift. And I will be using MLS head gaskets...
  11. O

    More boost in the rain?

    It was raining today and I took the Mustang out just to sort of see what would happen, It ran the same until I pushed it. Keep in mind I'm running a roots style blower and the scoop doesn't miss anything. If it's in the air it's going down the blower. Funny thing was where I usually have 8lb...
  12. O

    who has a custom overflow tank for the cooling system?

    Hi, I have a 91 Mustang and I need to get an overflow tank of some kind on it. Anyone know of a custom tank that fits nice in the fox body? I'm running a aluminum radiator with electric fans
  13. O

    Back of a 5.0 intake for temp sending unit? Bad idea

    I have heard that the back of the intake will show a lower temperature than the front. So I tried it to see. Bad idea Seems that the fluid for the cooling of the engine is only about 1/2 way through the engine and hasn't picked up the heat yet. I switched the sending unit back and forth...
  14. O

    Poke-n fun of the 6-71?

    I had mentioned trying out a 6-71 supercharger on a fox and got bashed a few times. "It's to heavy" "It's obsolete" "It's not as efficient as a KB" Yep,, That's all true. But I have been running it and I got to tell ya ,,, "It's just to much fun" When I pull in...
  15. O

    Wanted: I'm looking for an engine. Boost friendly WV OH NC PA

    I'm looking for an engine for my fox. I'm going to be doing some boosting so I don't want anything hi compression. What do you got? I'm in WV but will travel to pick up a good deal. May consider shipping also
  16. O

    Question about running MLS head gaskets and stock valve train

    I have a mostly stock 5.0 engine and I'm boosting and I popped a head gasket. I was thinking of running the Fel Pro MLS head gaskets but will my stock push rods still work? I see the gasket is .041 when compressed. Anyone know what a stock head gasket is when compressed? Or do you know if...
  17. O

    Thoughts And Opinions On The M-6007-x302 Crate Engine

    I have been looking at the M-6007-X302 crate engine and it would be hard to build a daily driver / street warrior engine for that price. With the aluminum heads and all stuff inside for $3650 I don't see how I could build an engine for that. I'm going to be doing a little boosting and I know...
  18. O

    Can a head gasket do this?

    Hi, I have a mostly stock 5.0 and I'm running a little boost 10lb max and this sounds nuts but here goes,, When I hit about 8lb of boost the water blows out of the radiator--So hard you got to see it to believe it-- But no water in the oil and no miss at an idle runs smooth and no problem...
  19. O

    GT-40 heads what can I expect to pay?

    What is a fair price on a set of GT-40 heads not the GT-40p If they are redone new guides and a fresh valve job and never ran? lite shave to make sure they are flat,,
  20. O

    Cometic head gaskets when boosting?

    Hi, I was told that Cometic head gaskets are really good head gaskets when boosting. Anyone run them or have any feed back on them?
Top Bottom
Back
Forums
Menu