Search results

  1. S

    AOD Help needed

    I had everything laid out to shim and add spacers for the TV valve assy Turns out someone in my house decided to move the valve assy by mistake Here is a pic does this look right? I was told by baumann for the best adjustment they have seen is (2) 0.55 spacers and one 0,032" shim. Where do...
  2. S

    windshield wiper issue

    I have a weird problem with my windshield wipers.. they will only work on HIGH and they will stop maybe every few minutes for 3-4 seconds then start again. Could it be the motor itself, relay or wiper assy on the column Cheers
  3. S

    AOD Baumann kit

    well today is not a good day, awful day at work so i thought would relax and try doing the baumann mod a couple of questions 1. On the 1-2 shift accumulator the retaining clip broke while being removed (very lighty) what do I do here? 2. The check ball was either in the (check ball...
  4. S

    I just got my Baumann recal kit

    Hi guys I just got my Baumann Valve Body Recalibration Kit and the Pressure Regulator Boost Valve Kit. I am hoping to do the install sometime this weekend. Any tips for the install? Has anyone found different setup tweaks that are better than what Baumann has in there instructions? I was...
  5. S

    Interior light

    Any idea's what the bulb # is for the little mag light looking light
  6. S

    Something strange after 3G install

    I did my 3G upgrade last weekend, And after driving the car all week I feel as if the car runs alot better now. Did anyone notice the same thing or is it just me haha
  7. S

    Best Headlight Bulbs

    Just wondering what people are using for Headlight bulbs? Cheers
  8. S

    Fuel Leak

    While I was changing my fuel filter today, I noticed a small leak on top of the gas tank where the hoses go in. What is the most common problem with gas tank leaks? I remember someone said there was a gasket or something Cheers
  9. S

    Urgent Help needed

    How do I release the fuel pressure 88LX Hatch 5.0L I have a leaking fuel filter and Iam in the middle of changing it Cheers
  10. S

    AOD

    Which is better, Epoxy mod from clickclick racing or Baumann shift kit Thanks
  11. S

    Info Needed

    Just wondering what kind of HP gains from installing Heads and upper/lower intake from a 96 Explorer.. And are these a direct bolt on to my 88 Non mass air?? And are these real GT40 parts on a V8 explorer Thanks I can get Heads and upper/lower intake for $300 cdn this a good deal??
  12. S

    Switching to mass air

    Just wondering what the benefits are from switching .. NON mass air to mass air Thanks
  13. S

    AOD Epoxy Mod

    Just wondering if anyone has a How-To on the Epoxy mod for the AOD Valve Body It was posted on the AOD forums for the longest time, but now all pics have been removed.. Thanks
  14. S

    Rear Shocks

    Just wondering if anyone has a how-to replace rear shocks in my 88 LX Hatch Cheers
  15. S

    88 Codes

    I have codes 10 - 22 - 82 I misplaced my code book, would you know what these codes are?? Thanks
  16. S

    Help Needed asap

    Hey guys I have a 88LX... I am having a problem with it It is misfiring when hot, when cold cars runs awesome I changed the plugs, cap, rotor and wires a month ago And this AM i took the car for a spin and it ran amazing, once hot it starts to mis-fire and buck at low rpms. It also hunts...
  17. S

    quick exhaust question

    Iam thinking about upgrading my mid pipe for sound on my 88LX still has stock (4) cats H pipe. I can get a used stock H pipe fairly cheap and was thinking about getting that an hollowing out the cats. Now if I hollow them out with this decrease performance at all? I would like to get and off...
  18. S

    Leaks

    After the crazy rain we had today, My drivers seat is soaked appears it is leaking on corner near the window. Also my drivers side door is full of water. Is this a common problem? mine never see's the rain. What the best way to fix this problem Thanks
  19. S

    Quick heater core question

    My heater core went a few weeks ago, so I by-passed it for now. But after getting caught in the rain the other day (what a nightmare) I need to fix it. I read on here about removing the glove box , cutting a hole in heater box replacing the heater core and glue the cut piece back on. Does this...
  20. S

    Sunday Drive

    I Was out for a sunday rip today and saw a perfect photo opportunity so I just had too. Not the best pics but, Wanted to drive since its supposed to be crap weather all week.. And yes I am missing some molding on the fender :(
Top Bottom
Back
Forums
Menu