Search results

  1. HuebyStang94

    how to fix my toe out problem

    Hey all, Installed a AJE Racing K-member with 03 cobra control arms. Now I have a serious toe out problem with my wheels. Not sure if I can get shorter outer tie rods/bump steer kit, or have to go with shorter inner tie rods? It definetly looks like I would run out of threads moving the...
  2. HuebyStang94

    Tubular K-Member & stock A-arm spacing problem

    Hey all, on my 94 GT I have a AJE Racing K-member. I am using spring perches and stock control arms. I am wondering if anyone else has done this and run into this problem. The K-member spacing is wider than the stock control arm bushings... as shown in this picture: What I've done is...
  3. HuebyStang94

    Relocating Alternator or other belt systems

    Hey all, here's the deal........... I got a great deal on a Turbo kit designed around a fox body. I'm working on making it fit the SN95. Below is my problem, because our front accessories place the alternator back more, I ran into a fitment issue (refer to pics below). Besides running...
  4. HuebyStang94

    ran car while overheated, loss of power now

    Hey all, I've developed a bad coolant leak. It happened quickly one night while driving, and the car ran for several minutes at 240-250+ F coolant temp according to my autometer temp gauge. Nothing happened... the car still runs, BUT after this occurance I have noticed considerable loss...
  5. HuebyStang94

    Horn not working, alternatives?

    Hey all, My horn has never worked. I'm not sure why, or where to begin to look. Recently I removed the horns in the fender to make room for mods. I now am moving and need to pass an inspection. I'm debating try to hook up the old horn and figure out what is wrong, or buying an...
  6. HuebyStang94

    How to fix play in steering wheel

    Hey all, about two months ago during the hot summer, my car got pretty hot one day... and after that I have a good amount of play/slop in my steering wheel. I'm talking like 5+ inches both ways before it "catches" and starts to turn the wheels. How can I fix this, I'm not sure where to begin.
  7. HuebyStang94

    96-98 cobra hood scoop screens?

    Anyone know where to buy the 96-98 cobra hood scoop screens? Thanks, Matt
  8. HuebyStang94

    cobra RR hood cowl GAP by back weatherstripping

    Those who have a SN95 car with a Cobra RR hood.... I put one on and I have a big gap between back of hood cowl and weatherstripping in front of windshield wipers. I was told they sell a kit, possibly taller/thicker weatherstripping to fill in the gap????? Just wondering what others'...
  9. HuebyStang94

    New engine in, vibration during acceleration

    Hey all, I have the new engine combo in and am experiencing vibration during slow rpm movement and acceleration. It is a “soft vibration” that you can feel through the car, and I can definitely feel it through the steering wheel. No odd noises though. It seems to settle down some at...
  10. HuebyStang94

    aftermarket hood alignment

    Typically on the SN95 cars, have people had to adjust the hood bracket where it mounts on to the BODY for alignment (not the mounting bracket to the hood)??? Also, have many modifications to the stock hood latch been required, or slight movement up/down??? I'm still working on getting mine...
  11. HuebyStang94

    Pull fully dressed engine WITH AODE?

    Hey guys, Getting ready to pull my engine, and was wondering if you think it is possible to pull the engine out WITH THE AODE attached? I'm going to remove the radiator, etc. and leave as much on as I can (front accessories, shorties, etc.). My only concern was the AODE. Let me know if anyone...
  12. HuebyStang94

    AC Condenser - Other years fit ours?

    In my quest to improve cooling for the Mustang I found a post that CobraJet NJ posted: ""Do you still have the stock A/C condenser in front of the radiator? The reason I upgraded mine to a 97 Cobra condenser was because the stock 94/95 A/C condenser is very DENSE (the fins are way to close...
  13. HuebyStang94

    no intake oil baffle and lot's of oil sucked up

    hey all, During my first lower intake swap I forgot to put the oil baffle back on. I have a turbocoupe one-way PCV valve in with a oil catch can on the line going back into my upper intake. Well, the can fills up pretty quick to 3/4 full, then stays there. Seems a little weird, that it...
  14. HuebyStang94

    Walbro 255 in-tank pump going out?

    Hey all, I have a in-tank walbro 255 fuel pump that has around 10,000 miles on it over 6 months. The other day after filling up the car would only turn over. I was getting plenty of spark, so I moved on to a fuel problem. One mechanic suggested banging on the fuel tank while cranking...
  15. HuebyStang94

    Best ground for amp in trunk?

    Hey all, I currently am setting up a amp + sub in the trunk. Is using the rear seat bracket (I flipped the rear seat down and found a bolt/bracket connection) adequate for a ground to a 700w mono amp??? Is there a better ground practice, or should I run it all the way up to the battery...
  16. HuebyStang94

    Installin water temp gauge on Performer lower ?

    Hey all, I'm installing a autometer electric water temp. gauge on my Edelbrock Performer lower. I installed the sending unit in the back on the driver's side. Here is a pic: Well, it's not reading much temperature (around 100F)..... I thought this was a coolant passage back there, but...
  17. HuebyStang94

    Speedo Calibration box in 94-95 AODE

    Hey all, Anyone here install a Dallas Mustang Speedo Calibration box on their 94-95 AODE? If so, how did you route the wires from the box (located in front of shifter, under dash) to the transmission (back-left side)? Any tips, ideas?
  18. HuebyStang94

    size of bolt for tensioner bracket?

    Hey all, does anyone know off hand the size/kind of bolt that holds the stock tensioner bracket?? I'm not talking about the tensioner pulley bolt, but the Torx bolt.. I need a new one, and do not have my old bolt for reference. Thanks!!!
  19. HuebyStang94

    Speedo still off, what else can I do?

    Hey all, My speedometer is off... it shows around 5 mph+ SLOW. This occured after I went from 3.73s back down to 3.27s. I have a 315/35/17 rear tire <-- these must be the cause of it? What can I do to fix this, a different speedo gear? Based on the table below I went with the purple 21...
  20. HuebyStang94

    Help on relay & switch connection for fans

    Hi all, I'm wiring up a manual switch for my main fan and tranny fan. I originally ran it all through the switches only, but they would overheat way too fast. So now I"m going to wire in relays for each switch. I'm having trouble getting it right though.... here is a diagram to help...
Top Bottom
Back
Forums
Menu