Search results

  1. M

    The horror, the horror.....

    The horror, the horror.....PICS So how bad is it doc? Ill post pics tomorrow when i'm changing the rear wheel. Early friday morning(5:30) i was headed to work in the Mach. I was maybe 45 sec from turning into the driveway to start my day as usual. Drove under an overpass and i see...
  2. M

    New summer mods. 56K not so much.

    Well i've been busy. Check these out. Installed several weeks ago and finally got pics. Whats new? H&R sports bilstiens MM C/C plates MM Rear control arms urathane rack bushings Magnum 500's Poorboy's EX sealant and Natty's wax no isolators in the front, stock in the back. Installed all...
  3. M

    just a tease...

    a bit late, ill upload some tomorrow after the wash. I couldn't resist mounting them on something(the Mach's not out yet...).
  4. M

    shop prices, no DIY here..

    What is a reasonable amount for installation of full length subframes and a panhard bar? So far i got quoted ~$1300 for parts and install, ~$900 just install... reading up on the technical parts of both of them and its something i can't do. The panhard i may, but there seems to be too...
  5. M

    buying suspension stuff...

    can someone pm the stangsuspension code we have? I promise pics when installing? lol so it won't be a total worthless thread, here's a before pic... oh and getting mm rear control arms, bilstiens, c/c's H&R sports etc..
  6. M

    no clearcoat on white, lies!

    So my boss says... back when he worked at a dealer service center(not too long ago) he got into an arguement with a customer about this. The customer was saying no automaker puts clearcoat on white vehicles. The customer said he was a paint tech/engineer at the local auto plant. He...
  7. M

    opinions on a 3 link suspension

    This has been rolling around my head all winter. I'm referring to the torque arm, /panhard bar set-up MM has. My Mach is only a DD for the 7 months of MI driving season. I may take it to the track,(never been, flame if you must). What I am looking for is to plant the rear better in...
  8. M

    Car woes... Fuel pump is suspected

    waiting to turn left on Ford RD onto Haggerty my car decided to die. Caused a nice line of angry Canton-ites to freak out. A guy in a sxt neon, mildly modded, of all people helped me to push her into a gas station(+1 for the neons out there). Would crank, nothing else. I suspect the pump...
  9. M

    The end all to lighting...99-04

    I decided I needed an other project and this is what I came up with... Pair - Acura TL bi-xenon projectors 1 Pair - Hella Gen 3 replica ballasts 1 Pair - Philips 85122+ D2S bulbs (4300K) 1 9007 Bi-xenon wire harness 1 Pair Ebay smoked headlights :shock: Just ordered everything...
  10. M

    new rear brake calipers...

    What site has some decent prices on stock replacements for 94-04? All I can find is bullitt Mach Cobra upgrades with hefty prices. I took a look at the 98 and the rear brackets are seized, saddness. looking to switch out from the brake line foward, any suggestions?
  11. M

    BTW i riced the Mach..

    a subtle touch, don't know if i like it yet.
  12. M

    polished goodness... driveshaft/exhuast review

    the parts came this week and i got to fiddle with them before i install them. I installed the drive shaft before I got rained out today. Makes the shifts much smoother on this auto(Mach). Haven't gotten to open it up on the highway but the whole car just seems a bit smoother, hard...
  13. M

    insurance, covers, the big W...

    Too early? Yes, Sigh. I have a few questions as this is my first time storing a car through winter. The Mach is going byby till spring, so now what? As im still paying her off, do I need to keep this heavy insurance pricetag on the car or is there usually a cheaper rate for the time it...
  14. M

    Rolled Tips?? Magnapacks...

    I installed the magnapack system for my Mach on thursday(sweet!). I also bought the 3.5" rolled tips to put them on instead of the ones the kit comes with. What is the best way to put these on? Since there is no bracketry that comes with them, I went to the local muffler shop to see...
  15. M

    Save the Animals!!

    How many critters have you saved lately? Funniest thing. Have you revved your engine when you see a squirrel trying to cross the road only to see it reverse and run for its life? I also did it pulling into a Starbucks last night, but I saved myself some bad luck as it was a black cat trying...
  16. M

    First 'mod' in progress for the Mach

    with pics! yeah, i know... doesn't look like much right now. I'm redoing some of the wiring and will clean it all up very nice when im done. I'll update as I go along just for kicks. the plan is this headunit with the ipod hookup and an 1200w amp(~400w rms)mated to a 12" sub...
  17. M

    Exhuast comparision(loudness)

    Its only been a week and I've already starting planning out the mods on my Mach. Compared to the exhuast setup on the 98'(see sig), how loud would the magnapack catback for the Mach be? Im just wondering on the loudness level. The 98 sounds great to me as it is, you know it has a presence...
  18. M

    Thinking about a Mach 1....

    Im pretty close in convincing myself to go ahead and get this Mach the local dealer has. Its a white auto with only 7500 miles. Their asking $20,000 for it to start. I haven't gone to look at it in person, but if it is flawless, there will be little stopping me in getting it. I think...
  19. M

    Replacing rear end...

    I've been tossing around the idea of just replacing the entire rear end all at once. My stock gears have been whining for too long now. With high mileage and all, I don't think that if I were to do a comple gear/t-lock/bearing swap it would go so well either. Also when I turn fast or slow...
  20. M

    PI Intake mod info

    I thought this might be useful to clear up some of the fuzziness surrounding the PI vs non-pi gaskets when doing the PI intake mod. non-pi---->http://forums.stangnet.com/showthread.php?t=495410 As you can see, you really have to gob up all along the sides of the gaskets to get a seal...
Top Bottom
Back
Forums
Menu