Search results

  1. B

    Going from 306 to 347...Questions

    THIS IS A 100% STREET CAR. It's not a race/track car. Please keep this in mind when responding as many have problems differentiating between the two!!! :D Current combo: DSS Pro Bullet 306 PMS Vortech V2-SQ at 13psi Edelbrock Performer RPM heads Edelbrock Performer RPM Intake...
  2. B

    Oil Separator pic

    I put two oil separators inline and removed the element from both and you can see that oil still passes from one to the other. Also I have a 1987 Turbo Buick pcv valve to aid in not boosting the separators and to help the Supra pcv control boost pressure...
  3. B

    Oil Separator users

    Are any of you guys using 2 separators inline between the pcv and intake? I know some guys, like myself, have their separator fill up a little too quickly thus the reason for adding another. And for you blower guys, do you use a check valve between the the separator and upper intake so not to...
  4. B

    PMS..Need help with idle

    I have an '04 PMS on my 93 GT and having trouble with the idle returning too slow after "blipping" the throttle. I have idle control set to "off" and it idles around 900 rpms. Hit the throttle and the rpms take too long to get back to idle (900).
  5. B

    Those with box stock Victor Jr heads on a 351 come in

    Looking for those using out of box Victor Jr heads on a 351 based motor. What is your set up and what kind of power are you making?
  6. B

    Dart block and keeping cool

    I've read in another forum where someone states that Dart blocks are hard to keep cool on the street as opposed to FRPP or World Products Man O War. Does this statement hold any validity?
  7. B

    Anyone ever purchase a shortblock from ADPERFORMANCE?

    Anyone ever purchase a shortblock from ADPERFORMANCE? I know many purchase bare blocks etc. from them but was wondering how their machined shortblocks are.
  8. B

    351 shorty headers

    Anyone using shorty headers on a 351?
  9. B

    Blower Motor..short stroke or longer stroke??

    Looking into 351 based centrifugal blower motor for the street and was wondering if it would be better to have a longer stroke (6.2" rod) or shorter stroke 5.4" rod. Would like to shift at 6500 with hydraulic roller.
  10. B

    Blower street motor question

    What would be the better choice for displacement and/or stroke for a street driven centrifugal blower motor? I was thinking of a 351 based block and stroke to a 427 but I think I may have read somewhere that it would be best to go with a shorter rod length than 6.2 Or maybe stay with a 302...
  11. B

    Issue with DCC FK35

    All of a sudden I am now burning up the fusible link when driving that goes to the controller. All wiring appears to be OK. I have had the unit installed for about 8 months. This is controlling an brand new Motorcraft Taurus fan. Could the controller be spiking or at fault?
  12. B

    Charcoal canister

    How do you know when to replace the charcoal canister? I have the line that runs from the gas tank still connected but the other side of the canister is vented to atmosphere. When I went to open the gas cap to fuel up I had alot of hissing sound come from the tank (more than normal) as if I had...
  13. B

    PMS Data Sets

    Does the PMS always start with data set 1? I have a different tune in data sets #2 and #3 but when the car is shut off and then back on, data set 1 always is loaded.
  14. B

    PMS question

    Can the controller be unplugged and the pink box stay?
  15. B

    PMS on the way

    I ordered AFM PMS today. Can't wait. Any info you guys can share with regards to installation and/or tuning would be appreciated.
  16. B

    50Resto bumper covers..Any good??

    Interested in getting a repro 87-93 GT bumper cover from 50Resto and wanted to know if anyone has had experience with them. How is the quality and fitment?
  17. B

    Need offroad H-pipe ASAP. Get BBK or Summit?

    I need to get an offroad H-pipe for my 93 and was wondering if I should just get a Summit one for $100 or spend the money to get a BBK for $160? My main concern is fitment. I had a horrible Mac one in the past and don't want to run into that this time around
  18. B

    Pinion angle after lowering car with Sportlines

    After lowering car approx. 2" with Eibach Sportlines, should I be concerned with the pinion angle? Has the angle been changed that much? Would adjustable uppers help fix the pinion angle?
  19. B

    Low Battery Voltage

    I have a fairly new Delco Battery (under a year old). Last time I drove my car was 3 weeks ago. Went to start my car and all I got was getting was one loud click from the starter solenoid. Proceeded to check battery voltage to measure 12.02 So I jumped the car and got it to start and then...
  20. B

    Oil Separator

    How many of you guys are using an oil separator from like Home Depot without the filter installed? Any of you guys using the larger size one?
Top Bottom
Back
Forums
Menu