Search results

  1. C

    Expired Diablosport Predator Tuner U7146

    Comes in original box but is married. Diablosport will unmarry it no problem over the phone for 129 dollars. I traded my car and forgot to unmarry it and put the stock tune back in. 99-04 gt mach1 bullitt. 50 dollars shipped lower 48.
  2. C

    Traction control question

    I was driving a buddies 04 GT today and noticed it did not have traction control. I thought all 2001 and up had it, and 99 and 00 it was optional. Anybody know the answer to this?
  3. C

    Air conditioner blows through defrost?

    I just bought an 89 LX 5.0 notch. The air works but blows on the floor and up through the defroster. Can anybody tell me the problem and how to fix it? I want it to blow out the vents, I live in Florida.
  4. C

    Mac LT question?

    I had Mac long tubes installed on my car recently. The passenger side header is leaking bad. I want to install a new gasket. I have read some right ups on the header install itself, but don't know what work is involved in just a gasket swap. Will this work to get at it? Take off the front...
  5. C

    Need a mod!

    My 2001 GT ran a 13.6 at 103.28 during my first pass ever in the car. I know it is not all that great, but it should improve with more time at the track. The time is with the mods in my sig. I just ordered and recieved Steeda aluminum LCA, Mac LT's, VRS off road X pipe, and a FIPK KN kit...
  6. C

    UPR white face gauge install?

    I already did the search button, but could not find the answers I need. My UPR glow gauges did not come with instructions. Can someone explain how to wire this thing up? There are 4 plugs on the harness and only 3 from the new white face covers. How do you plug them in? Also, where did you...
  7. C

    Vibration problems

    I bought my 01 GT used recently and it came with afternarket Eagle alloy rims with new tires. I noticed almost immediately that the steering wheel would shimmy back and forth roughly between 45 mph and 55 mph. The gear shifter does the same thing. It seems that it moves faster and slower with...
  8. C

    Mach/Bullitt pedal install

    I went to the FFW in Gainesville today and had a really good time. I bought some new Ford mach/bullitt pedal covers there. I spent only 5 minutes trying to put the clutch one on, after removing the factory rubber one. It did not work out very well. Is there a trick for a smooth installation...
  9. C

    3G question?

    I am installing a new 130 amp alternator. I did a search for installion tips already. Several sites conflict each other. Do I connect the 2 large black and orange wires and tape them off, or do I put ring connectors on each one and connect them to the back of the alternator the same place as...
  10. C

    Trick Flow head combo

    I have a set of TFS Twisted wedge street heads w/2.02 1.60 valves, and 1.70 rockers. I have a stock short block. I have been told to get a Crane 2031 cam and a Edelbrock Performer intake to complete my street/strip package. How does this H/C/I combo sound? Or what intake and cam combo would...
  11. C

    Motor mount change

    I am going to change my motor mounts tomorrow. Besides taking out the motor mount bolts and jacking up the engine, what steps need to be taken?
  12. C

    electric fans ?

    I just received a electric fan set up. It has two fans that mount on the radiator. They were used on a 5.0 car that was used for drag racing. I don't know what company made them. The hot wires for each fan are wired together as are the ground wires for each fan. I plan to use a toggle switch...
  13. C

    HCI combo question

    In another thread I stated how I just figured out that the heads I'm getting are TFS twisted wedge street heads, 2.02/1.60 valves. Comes with 1.7 TFS rockers and pushrods. A E-303 cam is comming with the heads also. My question is will the cam or another better cam work with these heads and...
  14. C

    What heads are these?

    A buddy of mine just bought a bunch of mustang parts, he got a set aluminum heads with the parts. He wants to sell them to me, but I need to find out what they are. The guy that sold them says they are AFR heads, but they don't have any AFR logos anywhere on the heads, or any other logo for...
  15. C

    Performance problems

    I recently installed my off road Mac H-pipe, and had a shop weld the middle together after I installed it. The first problem is I don't think the pipes were pushed together enough cause the driver side sometimes rubs against part of the undercarriage and is somewhat annoying. My check engine...
  16. C

    Off road Mac H pipe?

    The off road pipe I had for my 5.0 did not fit, it was my fault. I am picking up a Mac off road H pipe today. Does it have the opening for the smog pump tube or not? If so, I had to hacksaw my tube to get the stock piece off. I guess I could rig the tube together for now when I install the...
  17. C

    5.0 falls flat at 4k rpm ?

    Lately my 5.0 has been cutting out at around 4k rpm, like there is a dead spot and then picks back up. It only falls flat on its face like this when the car has been running for awhile. It just recently started doing this. I have already put in plugs, wires, cap & rotor, k&n, fuel filter, pcv...
  18. C

    H/C/I coming, help me!

    I want to save money, but want to get the right combo. My engine is basically stock. Edelbrock performer heads are just under a grand. What about performer heads, intake, and either a E or X cam? Is that good power for the money or is the rpm better? This is both a street and strip car and...
Top Bottom
Back
Forums
Menu