Search results

  1. I

    1994 Mustang Gt/saleen clone supercharged

    Selling my car on ebay take a look, $4500 reserve. item number 280552057399 just paste it in ebay search to see. http://www.ebay.com/
  2. I

    What would you buy, looking for advice

    Think its time to sell the 94 gt and start to look for a new project, just want something newer, but dont like the 2005 up body style, so thinking a 03/04 cobra or a 05-06 ls2 vette, what would you get. Cobra tons of parts can be bought not to expensive, vette looks way better, not a ton of...
  3. I

    A/c help

    When I bought my car it had A/c removed everything down to the compressor wire cut off, so I bought a complete system from a guy got it on, vacuumed lines, replaced seals,added oil, sucked in freon 2 cans but cant get compressor to kick on, tried to jump it at the a/c cycle switch with 2 wires...
  4. I

    Sct eliminator Chip

    Chip works great holds 4 custom tunes, you can buy a switch cable for about $25 to switch between tunes, pm for pics chip only, do not have cable. $80 plus shipping. Has a tune for 30# inj, and 76 C&l 76mm maf, will sell chip and 76 for $130 shipped. Heres info from Sct. SCT Automotive...
  5. I

    Shift light in clock pod

    Anybody got or seen a shift light that will fit in the clock pod, need to get rid of dead clock and need a shift light so just looking around. Fit it this 94-02 Ford Mustang Clock Replacment
  6. I

    Removed coolant overflow tank now airbag light on

    Any reason for this had to remove tank and bracket for blower install, seems after I did this get airbag code 41 RH Radiator Primary Crash Sensor Feed/Return Circuit Open, could that bracket ground something I even picked up another rh sensor and still get the code,what does this code mean...
  7. I

    Splicing into 02's for Lt's (already done)

    I decided to jack my car up today and check for exhaust leaks because I've been having idle surge problems for a while, decided to look at 02 wires and they were spliced into for the lt's looks to be the same size wires and good connections, is this ok, can I unplug 02 and check volts at each...
  8. I

    Exhaust leak

    I know I've read this but do you think its true, I have a slight exhaust leak where my hpipe meets my header and my car will not idle below 1100 rpm without a surge who believes this could be the cause, Ive had exhaust leaks on other stangs but all they had were like hpipe,mufflers,cai, and had...
  9. I

    Can my Eec be going bad without codes.

    As title says I'm using a Quarterhorse chip I get my car running pretty good afr's around 14 or so, smooth idle, runs strong, go for a ride 10 minutes or so come back home and tune does a 180 afr's jump to 20, rough idle, only thing I can do to get it back to normal is unplug battery, and that...
  10. I

    oil leak

    Just put on a u/l Trickflow intake, and a blower at 10 pounds boost have ran several times with no leaks until today I looked on the floor and at the back of the motor had a small puddle of oil on the floor, so I'm asking if the rear of the lower intake leaked would it leak oil or would it be...
  11. I

    Exhaust sound difference.

    Does anyone think the mod. motor exhaust sounds better and louder than the 5.0, I have full length headers,mac h pipe, and 44 flows and still cant get the sound I like, had a 96 with h-pipe and flows and to me it sounded way better whats the difference?:shrug:
  12. I

    Fuel pumps

    I'm about to get a blower and was wondering about fuel pump setups, I have a 155lph in tank pump now, thinking of going to a 255lph Walbro in tank, or could I use my 155lph in tank and a 255lph Walbro inline would this even work,or get a 255 in tank and a 255 inline, using 42# injectors and...
  13. I

    Disappointed with Trickflow quality

    I just got my new Trickflow Streetburner intake and it has bad tool marks on the front of it so I was a little disappointed now I have to go to the trouble of sending it back seems for 500 bucks it would be right but it happens sometimes.
  14. I

    P/s pump pulley 94 Gt

    I'm having a problem with my crank pully shredding off my 6th rib of my belt(on the front of pulley), I think its something to do with my P/s pulley I think its the wrong one, as you see in pics 6th rib is gone, and look at the washers on the p/s pump I've got it pushed back until it hits valve...
  15. I

    Engine noise in radio.

    Has anyone ever heard engine whine through a aftermarket radio but factory speakers, Ive heard it through an amp with sub but never like this and it comes and goes. I bought car used with it like this I pulled radio out and it has a wiring harness everything appears to be ok, the guy did put in...
  16. I

    Fuel Guage

    I'm gonna be putting in a new fuel pump soon so since I'm doing this I need to fix my fuel guage it is way off and doesn't even work some times, my question is what is needed to fix this problem, is there some sort of float?? or something in the tank to replace or could it be something else. I...
  17. I

    Give me some advice.

    Your probably tired of this topic. Its time to do a supercharger and I want to know your setup and numbers, and help me decide what to buy. And this is gonna be a pretty much street car, I'm thinking Kenne Bell cause I like torque. But maybe you can talk me into a Strim and save me some bucks...
  18. I

    Fuel pressure

    I just installed a fuel pressure guage and it only shows I have 11#, I just bought a Summitt brand ranges from 0-100, I have a BBk fuel pump 155, I see two fuel lines going into the injectors does it matter the one I used. Thanks
  19. I

    Tuner

    Can you use a Sct handheld tuner on these cars or not I hear yes and no, websites say for 96 and up models. I do have a Sct chip installed, Sct website shows some type of wire I could plug directly into my chip then I think I could use a handheld, or should I just get a dynotune and a new burn...
  20. I

    A/C

    I want to put the A/c back on my 1994 Gt it was gone when I bought it, I have nothing but the spouts coming out the firewall, I dont even know where the electrical plugs are, I do see the bracket to mount the compressor below my p/s pump on drivers side. What would I need Compressor, condensor...
Top Bottom
Back
Forums
Menu