Search results

  1. 4

    rearend

    i installed a lincoln rear a while ago and never noticed until now the rear tires are toed in is this suposed to be like this i thought the rear wheels were straight
  2. 4

    what happened

    i posted here this morning saying that i didnt like my sn95 front brake upgrade as it made my wheels stick out to far past the fender im looking for someone to sell or possibly trade me a set of 89-93 gt or the v8 spindles for the mark rotor upgr ade my post just dissapeared no where to be found
  3. 4

    egr tad tab

    i removed my tad / tad about 1 year ago now i read that you need to put resistors to make eliminators i have never had a cel come on do i still need this. also i am going to remove my egr will i need a eliminator for the vacuum solenoid on this i know i need 1 for the egr im gonna make this do...
  4. 4

    window motor bushing info

    I have been surfing posts and i noticed alot of tutorials on fixing the power window bushings the kits are like $20 at autozone what we always did was take the gear section apart clean all fragments of old bushing out and instead of getting new plastic bushings which will only break again in the...
  5. 4

    mark 8 fan switch

    installed a mark 8 fan and was wondering if 198 on /189 off would be ok for a 180 degree thermostat or should i use a 180 on 171 off
  6. 4

    battery location

    i own an 88 tbird but this forum is way better than the tbird forums on a battery relocation do you fuse the main wire from front to back and if so do you put it in the front or back i plan on fusing my 170 amp alt to starter relay than run wire from starter relay to rear battery
  7. 4

    maf swap ?s

    i want to go ahead and swap to a maf now. but not do the ho cam swap and stuff till i get my other engine rebuilt i didnt think a maf ho ecm would run a so engine but i found this website that says all i need to change right now is the injectors does this sound right...
  8. 4

    caliper ?s

    i drive a 5.0 tbird i did the sn95 front brake upgrade my question is that my wheels rub the caliper braket in the front the little bar is it safe to grind this down or cut it off i dont want to run spacers any help will be great
  9. 4

    code help

    i dont raelly know where to post this. i just bought a 92 cougar 3.8. took it to autozone for the free scan said codes 117 and 217 showed up but for 217 my car has distributor not coil packs and on 117 do i just need to change the sensor or would this be a wiring problem
  10. 4

    code help

    i dont raelly know where to post this. i just bought a 92 cougar 3.8. took it to autozone for the free scan said codes 117 and 217 showed up but for 217 my car has distributor not coil packs and on 117 do i just need to change the sensor or would this be a wiring problem.
  11. 4

    hydroboost install

    this weekend i am installing a hydroboost in my fox tbird. im using a booster for a 84 lincoln cont. i believe the bolt pattern and pedal arm will be the same
  12. 4

    mass on 5.0 so

    i have a 88 tbird with 5.0 and an aod. plan on moddingwith bolt ons maybe cam later was wondering about mass conversion on this motor. everything i read about is for 5.0 ho
  13. 4

    simple 3g question

    i have a 88 tbird with a 5.0 not to fast but i put 2 3g alts on it 1 for the car and 1 for stereo on the second one could i just put the green and red wire to the bat stud to make it self exciting any help please
  14. 4

    heater ?

    I have a 88 tbird, the temp run about half way on the gauge but when i turn on the heat it climbs higher. does anyone know anthing about this
  15. 4

    help fast out of time

    ive got sparkto the plugs hold 40psi fuel pressure fuel gettin to plugs tries to start but wont when it does it backfires through th tb then sometimes when stop cranking it rotates backwards put in a new timing chain set to try nd fix but didnt
  16. 4

    please help

    i bought a 88 tbird with the 5.0 when first started it idled rough but if you tapped the gas a few times it would smooth out. i replaced the thermistat and cap rotor oil trans fluid took the iac off and sprayed it with carb cleaner. when i first started it i heard a loud knocking so i shut it...
  17. 4

    4.6 hp

    so is the 210 stock hp, bhp or whp i thought all ratings were block hp but read that ford changed rating methods to wheel hp
  18. 4

    need to keep going

    should i keep going im new to the 4.6 engine. what i did was put one in my 90 rx7 vert. after weight reduction and the motor i hope to be at 2800 - 3000 lbs. i used the aode trans and have 4.10 gears. i had planned on shorty headers ,intake , plenum ,75mm tb, and spacer, 80 mm maf underdrive...
  19. 4

    can someone please help

    i have put a 4.6 in my mazda rx7 the coils fire. but it wont start if i run gas through the throttle body it will run. any ideas why the injectors wont pulse? i need any help
  20. 4

    obd2 dlc

    iput a 4.6 pi in my rx7 wiring is done except the dlc i need to know how to wire it i have the hot and ground and the 3 wires to the ecu but i dont know where the other 2 wires go if i even need them to run codes someone please help me thanks
Top Bottom
Back
Forums
Menu