Search results

  1. J

    New Rear End Break process?

    I am going to be finished with my new rearend soon and have heard a few different opinions on how to break it in correctly. One guy said run it with no stress (on blocks) twice getting it up to temp then letting it cool down, and then run it light down the road up to temp let it cool and your...
  2. J

    emissions in MD

    Does anyone know the emissions requirements for MD. Such as cats ect. or a link to where i can read up on this... thanks
  3. J

    a/c delete

    hey jus a quick question. Need an a/c compresser delete kit, i've seen them before but am having trouble. If you know where i can get one and if its called something else it would be a great help thanks.
  4. J

    intake cooling

    Hey, just a quick question. I am looking for some sort of heat repelent wrap to put around a intake to keep it cooler. It is a metal intake and keeps heating up pretty warm. I have seen like heat shield stuff that is almost like a tape but cant seem to find it. Any help would be appreciated...
  5. J

    quick question

    will a 99+ v6 mount in a 94-98 v6 wiring harness and such what would need to be changed
  6. J

    flywheel

    I need to get a 6 bolt flywheel to Ny and want to get one asap. I dont care about over night charges, does anyone know of a shop on the east coast, everyone im seeing is in cali or texas or someplace
  7. J

    94 indy svo

    Ok, my gf's dad is looking at buying a 94 svo indy pace car and i'm just wondering if this car is worth what he is asking. The car looks, smells, and runs like it just came off of the showroom floor. It is a convertable if that makes a difference and he has the papers saying its #***/1000(dont...
  8. J

    quick clutch question

    I have been looking at a new clutch since i have the motor out of the car, but Ads dont specify 6 or 8 bolt. Is this only for the flywheel, and then the 99-04 is the same clutch as long as its 10.5 or 11 depending on ur flywheel.
  9. J

    front of the motor?

    Does anyone have any pictures of the front of thier motor.... Im working on figuring out where some of the brakets/sensors bolt up to the front. Like where the second nuts are on the timing chain cover. Any pictures of the front of your motor, in or out of the car will help. Thanx
  10. J

    2v timingchain cover?

    Does anyone have a picture of the out side of the timing chain cover with all the bolts,pullies, and such on it.
  11. J

    WINDSOR CRANK

    WILL THE 6 BOLT CRANK FIT IN THE 99 BLOCK THAT CAME WITH THE 8 BOLT CRANK? ITS A 2V GT MOTOR WINDSOR BLOCK, BUT I KNOW THE 6 BOLT IS A ROMEO
  12. J

    5.0 stroker

    I was looking at the 5.0 stroker kit and the seller quotes"Your engine block may require clearancing for the center counterweights.", Does anyone know what they mean for this and how often it is required my car is a 99 gt so i have a Wind. block. Also if i need to "clear" it what do u do to...
  13. J

    5.4 block

    Is it at all possible to use 4.6 heads on a 5.4 block, also if so what other parts would i need that would be diff from whats on the 4.6, is all this worth it, if not would stroking the 4.6 be worth it the motor is out of the car right now anyways
  14. J

    6 or 8 bolt

    I just pulled the motor out of my 99 gt of which i just spun a bearing at 53k... but neways i though the gts came with a 6 bolt crank, and i most deff. took off 8 bolts to get the flywheel off. I did buy the car with 30k miles on it, so did the previous owner mess with this or did some of them...
  15. J

    67 gt 500

    I am looking for where i can find the 7 spoke wheels that were an option on the 67 gt500, they were 15x7 and i am looking to get an entire set of 7 with or without tires. IF anyone knows of anywhere i can get remakes or a set of origionals that are used but in good condition any help would be...
  16. J

    stroker

    I am wondering in the modular stroker kit what is different besides the crank... are the rods longer/shorter ect.
  17. J

    chip?

    I am building a new motor for my 2v this winter and i am putting stage 2 cams 30lb injectors kb boost a spark, msd boost a pump, as well as an n/a shortblock with 11:1 compression, are the fuel and spark curves goin to need to be changed more then i can do with a programmer? oh yea i also have a...
  18. J

    dis-4 ?

    I got a msd dis-4 system for under 100 so i went for it, i was reading into it more and i am wondering if it is possible to hook this up to a 99gt mustang ignition. If it is not possible does anyone know why, also how hard is it to convert my car car to a twin coil pack ignition, such as the...
  19. J

    COBRA BUMPER

    i JUST WENT OUT AND PURCHACED THE COBRA BUMPER AND "R" LIP FOR MY 99 GT AND I HAD HEARD BEFORE THAT THE GT HOOD WOULD NOT FIT THE COBRA BUMPER, IS THIS TRUE, IF IT IS TRUE DOES ANY ONE KNOW WHY :shrug:
  20. J

    4.6 2v wiring

    I am working on pulling the motor in my 99gt and i am wondering if there is an easier way of taking out the wiring harness then desconnecting it peace by peace from the motor. Is there some sort of main disconnect or acouple that would let most of the harness stay on the motor when i remove it...
Top Bottom
Back
Forums
Menu