Search results

  1. B

    computer harness questions

    I am going from the efi to a carb setup and i was wondering how to take out the harness on the driver side and if the headlights, turn signals are connected to the harness? thanks
  2. B

    going efi to carb

    I am going from efi to carb and i was wondering what is needed to do the swap the car is a 92 gt and is not daily driven? the current mods are below. thanks
  3. B

    what suspension for auto x and street

    I have maximum motorsports lower adj. control arms and bbk upper control arms and custom weld on subframes. What other suspension parts are recomended for this? thanks
  4. B

    fuel pressure gauge

    i am looking to get an autometer 2 5/8 fuel pressure gauge and i was wondering if the back of the gauge is a 4an male?
  5. B

    which driveshaft saftey loop

    I have the fms aluminum driveshaft and i was wondering what drive shaft saftey loop would fit the best around the driveshaft ?
  6. B

    valve cover

    I stripped the whole where the valve cover bolt goes into the head on my afr heads and i was wondering what is the best way to fix the stripped hole? thanks
  7. B

    upper control arms

    I am going to repalce the axle bushings soon and i was wondering if there is a load on the upper control arms and if they are heard to line back up with the bolts?
  8. B

    biggest slick

    what is the biggest slick that can fit on a 92 mustang without rubbing on the stock pony rim?
  9. B

    what bushings

    i am goin to replace the axle bushings what should i go with poly or sperical bushings in the rear?
  10. B

    replacing axle bushings

    they are only worn out in the axle no other bushing is worn
  11. B

    replacing axle bushings

    I have to replace the axle bushing soon and i am wanting to know what is the easiest way to install the bushings in to the axle? thanks
  12. B

    anti sieze

    i have a set of afr 165 aluminum heads and i forgot to use antisieze before putting in the plugs how should i take caution to take them out without messing anything up ans should it hurt anything?
  13. B

    adjustable lower cobtrol arms

    I have maximum motorsports lower control arms and i was wondering howw to adjust them to lower the cars rear end?
  14. B

    which tranny fluid

    i have 1000 miles on the rebuilt tranny and i want to change the fluid it is the 2.95 supoer alloy gear set. what fluid would be the best to put in it
  15. B

    running rich

    i have backed the fuel pressure reugulator to 35#'s ansd it is still running rich. I scanned the codes and the ect sensor was out of range could this cause it to run rich
  16. B

    what electric fan

    i have a flex fan righ now and lost the stock waterpump pulley bolts does anyone know what size the stock bolts are thanks?
  17. B

    what electric fan

    what electric fan is better the proform or the black magic? and will they both cool as good as the stock setup?
  18. B

    dynomax bullets

    I have flowmasters 40series with an xpipe with no cats and i was thinkin about goin with dynomax bullets. would there be any power gain and what would sound can i expect.
  19. B

    pulled codes and this is what I got.

    21 Engine Coolant Temperature (ECT) sensor out of range - ECT. what can i do about this code. 33 (O,M) ALL - EGR did not open/ respond during test or if memory code, did not open intermittently - EVP EVR PFE. Can i just get the ron morris egr delete sensor to clear up...
  20. B

    efi to carb

    What parts will be needed to change from efi to carb? and what carb is the best for the things in the sig.
Top Bottom
Back
Forums
Menu