Search results

  1. R

    Three inch exhaust for this? Sounds funny...

    I know someone who just got an 88 lx notch and he doesnt really know much about cars. He has a short throw shifter, king cobra clutch, cold air, cobra intake, udpullies, longtube headers into 3 inch exhaust and dumped. My qeustion is that the 3 inch exhaust sounds like to much for a 5 liter with...
  2. R

    How much for these wheels/tires....

    I have a set of 18" chrome cobras and a set of 55% worn Nitto 555r's on the the rims are in ok conditon ( a few curbchecks, slight peeling of chrome on inside of two wheels) And they are about two years old. How much for this combo could I get? I also have the stock 17" wheels off of my 96 gt...
  3. R

    how to fix pinging..nitrous going in soon..

    My question is how do I fix that damn pinging under hard acceleration, sometimes a good mid grade gas will do it but I am installing a 75-125 dry kit and I really do need my motor for the next few years. ANyone have this problem before/when running dry nitrous?
  4. R

    this combo any good? How much?

    I was thinking about a budget combo and I am very new to 4.6's. I have a 96 gt 5 speed coupe.... Ported/polished stock heads/ Stage one or two vt cams/PI Intake 70mm or 75mm tb? MAF-? Long tubes/off road pipe/ catback 3.73's About how much power? Any input would be...
  5. R

    Can anyone tell me the performance of my 96 gt ?

    I recently wrecked my 94 gt vert and bought a 96 gt 5 spped. For some reason I cant find ANY performance data on the net or here on stangnet. Any help would be greatly appriciated. I know these kind of questions are getting old but I really cant find any info on these negleted 96's. Also what...
  6. R

    Who has cheap bassani x pipes?

    Just wondering where you guys picked up your aluminized bassani x pipe from and the cheapest prices thank you.
  7. R

    1996-98 guys with nitrous come in...

    Which nitrous kits are you guys running and with what kind of results? Also who are the cheapest vendors?:shrug:
  8. R

    What mufflers/catbacks would sound good with an x pipe?

    I just bought a 96 gt and was wondering which mufflers/catbacks would sound good with an x pipe without being raspy. I want that deep full sound. Here are some combos I was thinking tell me what you think. 1. X pipe/ MAC mufflers 2. X pipe / Borla mufflers 3. X pipe/ Magnaflows ( packs)...
  9. R

    where do you buy borla guys? just the mufflers.

    wondering where you can buy justa borla mufflers instead of the catback. thanks
  10. R

    What are the 96 gt 5 speed stock times?

    :shrug: I just bought a white 96gt coupe with a 5 speed and was wondering what people have pulled as far as times on a completely stock car. I know the engines in the 96 gt's are the same as the 94-95's as far as power goes but the 96 feels like it has more go. What are the weight differences...
  11. R

    please help some advice on c/c plates on lowered stang im looking at

    i am looking to buy this 94 gt today and it is lowered 2'' in the back and 1 1/2'' in the front. The mechanic said that the tires are toed in. when I drive the car it doesnt shake of any thing and doesnt really pull to the left but the steering wheel is tilted to the left. Any input on this...
  12. R

    is this cobra a good buy? what kind of quarter mile with this power?

    went and test drove a 94 cobra coupe tonight and he showed me the dyno sheets and it made 255rwhp and 278rwtq what kind of quarter would it run it has a short throw 3.73;s a saleen stage one suspension. I am looking to possibly buy it , it has mac shortys, mac H, MAC mufflers, u/d pullies, short...
  13. R

    how nmany 94 laser red gt's came with a black/grey interior w/black leather and a T5

    i am looking at a 94 gt to buy after i totalled my 94 vert gt and was wondering if anyone new any websites that could tell me how many 1994 laser red mustang gt coupes came with the combo of black and grey interior with black leather seats , a 5speed and power everthing? I have never seen that...
  14. R

    i have decided on my h/c/i combo

    ive been shopping around and this is pretty much what i am set on ... edelbrock 2.02/1.60 performer rpm heads edelbrock performer intake comp cams xtreme energy 224/230 @ 512"to 515" lift 70 mm tb 76 MAF MAC shorty 1 and 5/8 headers new t-5 i should be looking at 290...
  15. R

    got $8,000 to build engine/trans combo and need some ideas

    it will be my daily driver and I need to replace my auto with a 5 speed and make about 375-425 to the wheels. I need help deciding what combo will work 347, built 302 maybe? I need an ss killer. :flag:
  16. R

    dissapointed with track results last night

    went to the track last night after my new o/r pipe and my times have not got any better my current best was 15.11 @92 and last night i could only get a [email protected]. It was 85-90 degress with high humidity but it is still bull****. then after i left my car started making a horrible clicking...
  17. R

    heavy cobras or stockers for best quarter mile time?

    going to the track tonight would it be worth it to use my stock wheels to get my best quarter mile time?
  18. R

    going to track tonight, should I use my 18x9 cobras or stock 16X8's for best time?

    i am going to the track tonight and was wondering how much time it would take off iff i used my stck wheels instead of my heavy cobras. i have 3.73's and traction on my car is not an issue. I just got my o/r h pipe in and really need to crack 14's. How will the smaller tires affect my 60...
  19. R

    just got mac h pipe in, it rattles,help!!!

    just got in my h pipe today and it seems to be hitting against this one spot on the underneth if the car right about the middle of the drivers door.anybody had this problem? what could I wedge in between the pipe and the underneth of the car to fix this? please any advice helps!
  20. R

    well bought the MAC h pipe =crappy quality

    bought the mac h pipe and the metal pieces aropung the flanges ALL have broken welds!what s***!What kind of gains from this prehistric creature?does anyone have MAC h pipe dyno tests or know where to find some? :bang: :damnit: :fuss: :notnice: :nonono:
Top Bottom
Back
Forums
Menu