Search results

  1. JimmyRGT

    electrical nightmare

    OK so driving home from work a few days, the voltage suddenly drops very low, the battery light comes on, and the car barely makes it home. Of course it will not restart and the battery is completely drained. I get the alternator checked and it is bad, same with the battery so I replace them...
  2. JimmyRGT

    starting problem

    Hey guys, havnt been here in a while but now im back. So im driving the car today (its a 95 GT) and it has been running fine. Only unusual thing is that recently when i start it cold it had a small delay before it started up. By that i mean i would turn the key, and there would be silence then...
  3. JimmyRGT

    fuel pump kill switch in a 95

    Hey guys Im moving into an apartmen and want to install a fuel pump kill switch on my car. Iv read the posts about the pre 95 5.0's and i was wondering if our cars have the fuel pump relay under the drivers seat as well, and if so what color wire would i splice, etc. Also is there a certain type...
  4. JimmyRGT

    95 cobra R rim question

    Hey I have them and one is cracked. Is it possible to get a ripoff cobra R rim and replace the center cap with the Ford one? I know it is wrong but Im broke and need to get it replaced.
  5. JimmyRGT

    Atlanta area machine shops???

    Hey guys Im about to buy some used Edelbrock heads for the ole stang and want to get then CNC'd before they go on the car. Where are the good machine shops in the area? Im more concerned about quality work than i am the price. Thanks for the help.
  6. JimmyRGT

    Stock hood, strut tower clearance

    Stock hood, strut tower bar clearance Hey guys Im about to do a Head, Intake, TB swap on the ole stang. Goin with edelbrock performers, trick flow street heat and a BBK 70mm. Will this fit under the stock hood and strut tower bar or will i need to replace one or both of them? Thanks for the...
  7. JimmyRGT

    cost to machine heads?

    Hey guys Im about to buy some heads for the ole stang. If i buy used ones i will probobly want to have them machined and possibly ported. How much does it generally cost to get them CNC'd and or stage 1 ported? Thanks for the info.
  8. JimmyRGT

    which heads do i get?

    Alright its time to buy the heads and i dont know which ones to get. The 3 that I am considering are the Trick Flow twisted wedge, Edelbrock performer, and AFR 165's. I know that the AFR's are good but cost is a big factor for me. Are they worth the extra money? Or do either of these other heads...
  9. JimmyRGT

    which throttle body do i get?

    Alright iv been puting a lot of posts here about the mods i am about to make, i just want to make sure i get everything right before i do it. You can see in my sig what iv done so far and i am about to put AFR 165's, and a Trick Flow Street Heat Intake on it. My original plan is to put a 70mm...
  10. JimmyRGT

    MAF big enough?

    Hey guys Im about to do a head, intake and Tb swap. Going with AFR 165's, Trick Flow Street Heat Intake, and a BBK 70mm TB. Right now on the car I have a C & L 73 mm MAF. I have heard that you need a MAF at least 5mm bigger then the TB. Is this true? Is my 73 big enough to get the TB proper air...
  11. JimmyRGT

    doin a h/i/tb swap what do i need?

    Hello I am doing a head, intake, tb swap soon. Probobly gonna be AFR 165's, Trick Flow street heat, and a BBK 70 mm. Also gonna throw on some RR's. What do i need besides the parts for this? Gaskets, bolts, etc? Want to make sure i have everything before i get started. Iv got a 95 gt. Thanks for...
  12. JimmyRGT

    which RR's?

    Hello soon I am going to puting either AFR 165's or Edelbrock Performers on the ole stang along with a trick flow street heat intake and bbk 70 mm TB. I want to add some roller rockers as well but I dont know size to get. Should i get 1.6's or 1.7's? Is bigger better? And more importantly would...
  13. JimmyRGT

    questions about nitrous...that dirty word

    Hello I am planning on puting nitrous in the stang in the next 6 months. I need all kinds of advice. Which are the best brands for mustangs? Also which would be better, a dry or a wet system? You can see what i have right now in the sig and soon i am doing a head, intake, and TB swap. I would...
  14. JimmyRGT

    any mustang places/ dyno places in atlanta?

    Hello just wondering if anyone knows of any sport garages in or around the atlanta area. I am about to do a head, intake, TB swap and was wondering if there are any reliable shops that could install the heads since im a little scared of attempting that myself. Also does anyone know of any dyno...
  15. JimmyRGT

    got some money now i want HP

    Hey guys been a while since Iv been on here hope everyone is good. Iv finally found some money with which to do some big stuff to the ole stang. You can see in the sig what iv done already. I think its now time for the bigger stuff :lol: I know i want to do the intake (upper and lower) and the...
Top Bottom
Back
Forums
Menu