Search results

  1. FO94302GTRD

    What's with the 15" spare???

    I don't know if my car originally came with 17" wheels or not, but the spare is 15". Rolled up alongside the wheels on the car, the spare's about 1 1/2 inches shorter than the regular wheels, which are 17x9 on 245x45x17's. If needed, is it safe to use this spare? I could just picture my car...
  2. FO94302GTRD

    Help! TT II's and offsets, backspacing!

    OK, so I'm about to order a set of 4 17x8 American Racing Torque Thrust II wheels. I know I need a 5x4.5 bolt pattern, but what about the offset and backspacing? That company has got A LOT of options. Thanks for any help.
  3. FO94302GTRD

    BBK EGR bung won't seal!

    I wouldn't rule out using the stock EGR tube My BBK EGR tube was too short as well. Don't let anybody tell you BBK has bad customer service, they shipped me a replacement soon after I called them. But guess what, they sent the exact same EGR tube! :bang: My mechanic cut down the stock...
  4. FO94302GTRD

    Centerline Telstars for daily driver?

    Ok, some may remember me asking about Bullitt wheels. I'm really considering Bullitts, but at the same time some 15" wheels would look good on my car too. I like the Centerline Telstars, but can I really drive on these everyday? I would like to run 15x7's up front and 15x10's in the rear...
  5. FO94302GTRD

    10.5" Bullitt wheels--will they fit?

    Hey, thanks for all the replies! Pardon my ignorance, but what is a quad shock? Is flipping them over pretty straightforward? The wheels I'm looking at buying are the one's over on mustangtuning. I am not sure if they are made by AFS.
  6. FO94302GTRD

    10.5" Bullitt wheels--will they fit?

    I'm planning on buying some new wheels and tires. I was looking at the knock off 17x9 and 17x10.5 Bullitt wheels. Will these rear wheels fit my '94 GT without any modifications? As for tires, I was thinking 245's up front, but what size rear tire would you recommend? BTW, my car has been...
  7. FO94302GTRD

    My H-pipe came apart!

    Well, sort of. Slip fit connectors are no good. I hit something in the road while driving and it knocked the rear drivers side collar over the hpipe flange, which resulted in that sides hpipe disconnecting from the catback. My car went from sorta loud to WAAAY to loud. So, what is the...
  8. FO94302GTRD

    Any difference between Cobra & GT40 *lower* manifolds?

    I'm wondering if there's any difference between a Cobra and GT40 lower manifold. The reason I'm asking............planning on going with a Kenne Bell blower in the future and they bolt up to a GT40 lower manifold. Both manifolds appear similar, is there any difference? Thanks.
  9. FO94302GTRD

    For those with Autometer tachs......

    Well, the car is not physically slowing down, just the tach needle. The stock tach needle won't go past 3000 RPM, even if I floor it while in neutral. And if it makes it that far, it'll stick till I drop the car back to idle. The autometer needle just seems to really take it's time climbing...
  10. FO94302GTRD

    For those with Autometer tachs......

    Ok, so I had an Autometer 3 3/4 inch tach mounted in my car a few days ago because the stock tach is not accurate, and actually binds past 2500 RPM. I though my stock tach was binding due to a previous owners poor white-face gauge install, but now I'm not sure. When accelerating, my Autometer...
  11. FO94302GTRD

    BBK sent wrong EGR tube...

    "do you have an intake spacer or anything like that cause if you do it will be short. Just throwing out ideas" No, no intake spacer. Seems I'm not the only one who's had this problem. My stock tube was modified to fit, and both of the guy's who put the headers on said it should be fine, but...
  12. FO94302GTRD

    BBK sent wrong EGR tube...

    I got my BBK shorty headers and h-pipe installed yesterday. Everything went smoothly except for one thing, BBK included the wrong EGR tube. The one in the kit was about an inch too short. The shop fab'd a new tube from the stock piece, but I'd like to get the right part from BBK. Should I...
  13. FO94302GTRD

    Question about Pro-5.0 shifters......

    Ok, this question is a little silly. On my Pro-5.0 T5 shifter there is a bend on the actually shifter handle. The bend starts right where the threading starts on the shifter handle, where it's welded on. It bends to the right. Is this normal? I haven't installed the shifter yet and...
  14. FO94302GTRD

    Where can I find a stock black-face gauge set?

    Well, this weekend I'll take the gauge cluster out of the dash and see just what lurks beneath that white overlay. I assumed that the black overlays would not be under the aftermarket set. I read a tutorial on installing aftermarket overlays, and in the pics there is definetely nothing but...
  15. FO94302GTRD

    Where can I find a stock black-face gauge set?

    When I purchased my car, it came with white-face gauges previously installed. I would like to change the gauges back to the stock black color. Now here's the problem, I haven't been able to find a set of stockers, or any black gauge faces (except for some tacky ones with flames on them.)...
  16. FO94302GTRD

    KB charger on a stock '94 GT, can it be done?

    Ok, so I own a bone stock 94 GT (save for flowmaster 2 chamber exhaust,) and I'm thinking about putting a KB 2.2 Blowzilla/Flowzilla charger on the car. The car has 47,000 miles. What exactly is needed for the installation, besides what already comes with the 2.2 KB kit? I've read about...
Top Bottom
Back
Forums
Menu