Search results

  1. axeman

    Hesitation When Shifting During High Rpm's

    Got a slight hesitation when shifting during high rpm's. It doesn't seem to do it any other time. Has anyone else had this issue? I recently installed a Focus SVT fuel pump because of low pressure and fuel bleedoff, but the issue was there prior to that. The plugs and coils are supposedly...
  2. axeman

    Need Advice On Another Bbk X-pipe Rattle

    Hello there, I was wondering what others have done to remedy the rattle that seems to come from these pipes. I made the mistake of buying a barely used BBK catted X-pipe. I like the sound of my exhaust, but it has developed a really bad rattle a couple weeks after I installed it. I've since...
  3. axeman

    Do pony wheels and center caps fit on with 4" lugs?

    I wanting to run some other wheels once in a while besides the draglites. Thinking about getting some pony's again. I'm curious if anyone knows for sure if the center caps will fit on with my 4" lugs on the rear axles. Thanks, Mark
  4. axeman

    Black shows every imperfection. What colors do the opposite?

    I'm looking at painting my car sometime in the near future and my car is not perfect. I want to do a color change because the car is black. What colors do you recommend that will help hide any flaws in bodywork? This is no show car and I don't plan on spending thousands. I would just like a...
  5. axeman

    just a test

  6. axeman

    Mod help please. Accessing username?

    For some reason I cannot access my username of "axeman". I tried to use the link that sends your info to your registered email address, but I'm thinking that my registered email address was my old one. my new one is [email protected]. Can you please help me fix this?
  7. axeman

    Test

    Blah Blah Blah
  8. axeman

    stangnet sluggish lately?

    i've been having slight problems lately. sometimes a bit sluggish. most of the time i have to press the back button 2, sometimes 3 times before it responds. just thought it couldn't hurt to say something.
  9. axeman

    what are some decent street/strip shocks for the front?

    i just bought some Competition Engeneering 3 way's for the rear and i am thinking of getting some shocks for the front. i see lakewood has fixed rate shocks for ~$92 ea. i would like to get some adjustable's, but the fronts get fairly pricey. anyone have any recommendations? i guess i...
  10. axeman

    is 26x10 ET Drag too much tire for my combo?

    currently i'm running 27x10.5 ET Streets, but i want a better 60's. My best is a 1.78, but it's not very consistant at all. I cross the line ~5500 rpm according to the factory tach which may be off a little. I'm thinking of getting ET Drags and i have a friend selling 26x10.5's. Do you think...
  11. axeman

    i take it a stock cat H-pipe from 87-93 won't fit 94 and 95?

    anyone know for sure. my friend might be looking at a 95gt. it has an off road H-pipe and he'll need to get emmissions done. i still have my old stock cat H-pipe hanging in the garage and wondering if it would bolt up without much problem.
  12. axeman

    why would the idiot light for airbag come on?

    stupid light came on not too long ago. not the check engine light, but one for the airbag. what do you think it means? i guess i'll run the codes sometime soon.
  13. axeman

    How much power to expect from Pro-M 75mm Bullit?

    can I expect 10HP and maybe drop a tenth in the quarter? I just ordered on and should have it soon. Then I'll get to the track and see what happens. Of course, it'll have to be after I replace this stupid water pump that started leaking on me.
  14. axeman

    need estimate on how much to cut off coil springs!

    anyone have an estimate for how much to cut off the coil springs to lower the car? i want to lower the rear 1" and the front 2". my car weighs ~3085lbs
  15. axeman

    anyone adjust there suspension per Baseline Suspension?

    i've been doing alot of reading about adjusting my suspension to get the recommended Instant Center, Percentage of Rise, Anti Squat, etc. i'm wondering if anyone here has adjusted there stock suspension following Baseline Suspension's guidelines. According to all my calculations my Instant...
  16. axeman

    Will a Crane HI-6 ignition work for me?

    i would like to get an aftermarket ignition. what i really want is a 2 step, but a rev limiter may work. if i were to have a rev limiter set for 5500, would it work as a launch control device? i usually launch anywhere from 4500-5500 rpm's and i'd be willing to launch at 5500 all the time...
  17. axeman

    compression fitting fine for brake line? NEED ADVICE PLEASE!

    sorry, not stang related. it's for my other vehicle (cough, chevy blazer, cough). hey, i can't complain, it has 235K miles on it. i have a brake fluid leak. the metal hydralic brake line runs to the rear where it joins to a hose. at the other end of that hose is a fitting that is a...
  18. axeman

    port match EGR spacer to intake?

    i have a tfs street heat intake with the stock throttle body and egr spacer. would i benefit from port matching the spacer to the intake?
  19. axeman

    How to hook up 2 step?

    I would like to get myself a 2 step for my 5 speed. I'm wondering some ways to hook one up without an aftermarket igniton, ex. MSD 6AL. any advice?
  20. axeman

    raise or lower fuel pressure on a hot day?

    i know weather plays a big role in HP. colder, denser air gives your car a few HP. so does that mean that you are running a little leaner? is it safe to assume that on hot days i could drop the fuel pressure down a few pounds and see a little difference? i'm just trying to understand how...
Top Bottom
Back
Forums
Menu