Search results

  1. L

    Car in my backyard..

    Those are pretty nice cars. I would restore it I'm a car buff anyways but if you got the motor thtrow it in and run it. Might not go back tot the 2.3 though :( some parts might be hard to find. But one nice thing is that Gm's parts pretty much interchange :D Good luck..
  2. L

    Can i use a 140 guage Cluster?

    I read it wrong myself i thought he meant 85' stang(DUHHHHH!!!) I need to sleep. If thats the case swap out and swap in...
  3. L

    HELP!

    1/4 inch drive 10 mm socket with a little swivel just follow how you took it off to put back on. Don't crank the bolts to tight or it will leak on ya. Snug them up and then a little less then a 1/4 turn. Double check your antifreeze refill if nec. then run it and see if it leaks after it...
  4. L

    Is this turbo kit worth it?

    I't does say they use this kit for rangers!! In my oppinion that isn't to bad of a deal if you got the cash like that. That looks like Stingers header!!! But if you want everything new and you know it works just bolt it up and go. Just think Stingers header goes for around 350.00 ball park...
  5. L

    N/A People!!

    just wanted to know what the N/A people have for mods and what type of motor work they have done. What you see in my signature is what i have done plus a roller cam. Also who is running a turbo on a 2.3 without forged pistons and at what psi. I'm looking to squeeze whatever i can out of her...
  6. L

    Ram air!!!

    Hey all it's been awhile i have been a little lazy due to hardly any work. Interests rates down and people have money to pay for there cars. But anyways i been trying to get myself motivated and came up with a ram air setup. I know this will only help for top end but i figured what the hell...
  7. L

    Need help with a part!!!

    What's up? I was wondering if anyone could get me a part# for a cross pin for a 7.5 rear? I put 4.11's but had to grind the pin to give me room to put the clips on the axle. Never doing this before i notched the wrong sides of the pin now causing a little travel side to side with the axles. Ive...
  8. L

    Wiring instructions for turbo swap

    Don't be cheap do it right the first time. Less problems for you in the end. You look around you can get an la3 anywhere from 40.00 to a 100.00. That will be best cheap investment you will get. The newer computer you have the better,also you can add things to the la3.
  9. L

    Nyone want 2 polycasts?

    Be honest with you don't have a clue what those are!!!! Got a pic??
  10. L

    cold air intake

    Go to lowes and get a 4ft piece 3" pvc,90 degree elbow, rubber reducer from three to the the trottle body,3"pvc bracket to hold it in place and a cone filter from auto zone. Oh!!! Don't forget pvc primer and glue. Here is what I did!! Hope this helps!!
  11. L

    Svo control arms!!

    Just wanted to know if aftermarket control arms will fit on this thing? Can't find any oem replacements and found a kit for the price of one control comes with coil overs and parts. Plus i have the original konis will coil overs fit on here?? Thanks any info Asap would help thanks!!! I made...
  12. L

    Lets try this again!!!

    Thanks Crovax That might help some I'm just burnt not sure where to go with it from here. I finally got to pull some codes and the book i hav only goes up to 59 and the in the back in spanish has all the other codes and sorry not that fluent in spanish. But i pulled these 22,23,54,68,81,82,83...
  13. L

    Lets try this again!!!

    Hey all I figured i would try another post just can't seem to get any help anywhere!! I got everything wired up now but i can't pull any codes from my computer soon as i go to hook up the test plug it just stays lit up and the beeper is constant even with the car running. Also when the key is...
  14. L

    Another problem

    Well as you all know i rewired my 84'svo with an 89' harness. I finally got her running well lastnight sitting here idleing about every 5 min or so give or take. It would just lose power for a quick second. So tonight i put a volt meter on it and alternator was reading 14.33 then when it did...
  15. L

    parking brake light....

    Check your brake fluid level!!!!! Your probably low thats also a low brake fliud light..
  16. L

    Taurus Alternator!!!

    Hey all just wanted to know if the taurus alternator is the same as the 3g? i saw some pics and tried to compare. They look the same to me!!! Also is the alternator the same on a mark VII? I think my external regulator is going. Was coming home from seeing my daughter in my svo and it looked...
  17. L

    3G upgrade with external regulator

    Here is a post i found!!!! I plan on doing this swap as soon as i find one cheap!!! I have a 84 svo. Yes!!!! It's been done... http://forums.stangnet.com/showthread.php?t=450131&highlight=alternator
  18. L

    Read this!!!!

    Hey all i got the svo running finally i was checking the coil because i wasn't getting any spark last night and a couple of other things. Well got up this morning and figured i would just keep messing with it so i took the coil and distributor from my 89' and threw them in and viola it started...
  19. L

    Really need help now!!!

    Went with my gut and took the puter back and got anotherone and sure enough relays aren't buzzing but still have no spark to the distributor. coil has power but not sending spark swapped it with another and still nothing. Still no power to the starter relay from the key i checked...
  20. L

    Really need help now!!!

    You think this solve my problem?? Ive rewired everything over and over I'm at witts end I need this thing running no later then sat tomorrow I'm trying to go see my daughter my other car is ready to die the wrist pin is banging ppretty good. Besides the point i see the two plugs for the clutch...
Top Bottom
Back
Forums
Menu